7000-40881-0360120 Murr Elektronik Electronic Components

7000-40881-0360120 Product Details

• Product article number of manufacturer
  7000-40881-0360120
• Cable length
  1,2 m
• Torsion speed
  35 cycles/min
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Torsion stress
  ±180°/m
• Acceleration (C-track)
  max. 10 m/s²
• Travel speed (C-track)
  max. 3 m/s
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Bend radius (moving)
  10× outer Ø
• Bend radius (fixed)
  5× outer Ø
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Test voltage
  2500 V AC
• Current load capacity
  to DIN VDE 0298-4
• Nominal voltage
  300 V AC
• Color (jacket)
  yellow
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Outer-Ø (jacket)
  5.9 mm ±5%
• Material property (jacket)
  CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Material (jacket)
PUR
Shore hardness (jacket)
90 ±5 A
Stranding combination
3 wires twisted
Shield
no
Color/numbering of wires
bk numbered, gnye longitudinally striped
Shore hardness (wire isolation)
70 ±5 D
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Material (wire isolation)
PP
Wire-Ø incl. isolation
1.85 mm ±5%
AWG
similar to AWG 18
Diameter (core)
3× 0.75 mm²
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Single wire Ø (core)
0.15 mm
Resistor (core)
max. 26 Ω/km (20 °C)
Material (wire)
Cu wire, bare
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Cable weight [g/m]
56,1 g
Cable identification
036
Pollution Degree
3
Cable Type
3 (PUR)
Temperature range
-25...+85 °C, depending on cable quality
Material (gasket)
PUR
Switch off delay time
max. 20 ms
Housing
Black plastic (gray on request)
Compression gland
M12 (SW13)
Locking material
Zinc die casting, matte nickel plated
suitable for corrugated tube (internal Ø)
10 mm
Material
MSUD (PBT); M12 (PUR)
Protection
IP67 inserted and tightened (EN 60529)
Switch off peak
max. 55 V
Operating current per contact
max. 4 A
Rated surge voltage
0.8 kV
LED display
yellow
Current consumption
max. 15 mA
Material group
IEC 60664-1, category I
Form
40881
Operating voltage
24 V AC ±20% / DC ±25%
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)

Product condition

Related documents 7000-40881-0360120 Specs