7000-40561-2302000 Murr Elektronik Electronic Components

7000-40561-2302000 Product Details

• Cable length
  20 m
• Product article number of manufacturer
  7000-40561-2302000
• Torsion speed
  35 cycles/min
• Acceleration (C-track)
  max. 10 m/s²
• Torsion stress
  ±180°/m
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Travel speed (C-track)
  max. 3 m/s
• Bend radius (moving)
  10× outer Ø
• Temperature range (fixed)
  -40...+80 °C
• Temperature range (mobile)
  -25...+80 °C
• Bend radius (fixed)
  5× outer Ø
• Current load capacity
  to DIN VDE 0298-4
• Nominal voltage
  300 V AC
• Color (jacket)
  gray
• Test voltage
  2500 V AC
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Material property (jacket)
  CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
• Jacket Color
  gray
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
Outer-Ø (jacket)
4.1 mm ±5%
Shore hardness (jacket)
90 ±5 A
Material (jacket)
PUR
Shield
no
Stranding combination
3 wires twisted
Material (wire isolation)
PP
Color/numbering of wires
br, bk, bl
Shore hardness (wire isolation)
70 ±5 D
Construction (core)
32× 0.1 mm (multi-strand wire class 6)
Wire-Ø incl. isolation
1.25 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Single wire Ø (core)
0.1 mm
AWG
similar to AWG 24
Diameter (core)
3× 0.25 mm²
Material (wire)
Cu wire, bare
Cable identification
230
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Resistor (core)
max. 79 Ω/km (20 °C)
Cable Type
3 (PUR)
C-track properties
10 Mio.
Cable weight [g/m]
26,4 g
Wire isolation
PP (br, bl, bk)
Pollution Degree
3
Outer Ø
4.1 mm ±5%
Temperature range
-25...+85 °C, depending on cable quality
suitable for corrugated tube (internal Ø)
M12 (10 mm); M8 (6.5 mm)
Material
PUR
No./diameter of wires
3× 0.25 mm²
Mounting method
inserted, tightened
Compression gland
M8 (SW9), M12 (SW13)
Material (gasket)
FKM
Locking material
Zinc die casting, matte nickel plated
Standards
DIN EN 61076-2-101 (M12), DIN EN 61076-2-104 (M8)
Operating voltage
max. 50 V AC/60 V DC
Operating current per contact
max. 4 A
Rated surge voltage
1.5 kV
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
Coding
A-coded
Operating voltage (only UL listed)
max. 30 V AC/DC
Material group
IEC 60664-1, category I
Locking of ports
Screw thread (M8/M12×1 mm) recommended torque 0.4/0.6 Nm, self-securing
Form
40561

Product condition

Related documents 7000-40561-2302000 Specs