7000-08041-2305000 Murr Elektronik Electronic Components

7000-08041-2305000 Product Details

• Cable length
  50 m
• Product article number of manufacturer
  7000-08041-2305000
• Torsion speed
  35 cycles/min
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Torsion stress
  ±180°/m
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Travel speed (C-track)
  max. 3 m/s
• Acceleration (C-track)
  max. 10 m/s²
• Bend radius (fixed)
  5× outer Ø
• Bend radius (moving)
  10× outer Ø
• Temperature range (fixed)
  -40...+80 °C
• Current load capacity
  to DIN VDE 0298-4
• Nominal voltage
  300 V AC
• Temperature range (mobile)
  -25...+80 °C
• Test voltage
  2500 V AC
• Jacket Color
  gray
• Outer-Ø (jacket)
  4.1 mm ±5%
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Color (jacket)
  gray
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Shore hardness (jacket)
90 ±5 A
Stranding combination
3 wires twisted
Material (jacket)
PUR
Shield
no
Color/numbering of wires
br, bk, bl
Material (wire isolation)
PP
Shore hardness (wire isolation)
70 ±5 D
Wire-Ø incl. isolation
1.25 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
AWG
similar to AWG 24
Diameter (core)
3× 0.25 mm²
Cable weight [g/m]
26,4 g
Construction (core)
32× 0.1 mm (multi-strand wire class 6)
Single wire Ø (core)
0.1 mm
Resistor (core)
max. 79 Ω/km (20 °C)
Material (wire)
Cu wire, bare
C-track properties
10 Mio.
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Cable identification
230
Outer Ø
4.1 mm ±5%
No./diameter of wires
3× 0.25 mm²
Cable Type
3 (PUR)
Stripping length (jacket)
20 mm
Wire isolation
PP (br, bl, bk)
Pollution Degree
3
Temperature range
-25...+85 °C, depending on cable quality
Material (gasket)
FKM
Material (contact surface)
Au
Mounting method
inserted, tightened
Material (contact)
Copper alloy
Standards
DIN EN 61076-2-104 (M8)
Material
PUR
suitable for corrugated tube (internal Ø)
6.5 mm
Locking material
Zinc die casting, matte nickel plated
Compression gland
M8 (SW9)
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
Operating current per contact
max. 4 A
Material group
IEC 60664-1, category I
Form
08041
Rated surge voltage
1.5 kV
LED display
no
Operating voltage
max. 50 V AC/60 V DC
Operating voltage (only UL listed)
max. 30 V AC/DC
Locking of ports
Screw thread (M8×1 mm) recommended torque 0.4 Nm, self-securing
No. of poles
3

Product condition

Related documents 7000-08041-2305000 Specs