56220 Murr Elektronik Electronic Components

Murr Elektronik 56220 Schneider Electric RH10P is a flush-mounted automation part designed for remote reset and test functions. It features instantaneous protection settings at 0.03A and includes digital outputs with an SPDT (Single Pole Double Throw) fault contact and an SPST (Single Pole Single Throw) voltage-presence contact. The supply voltage requirement is AC 50/60Hz at 110-130 V. This part is equipped with earth-leakage protection functions, operates with a minimum current of 0.01 A at 12V minimum load, and has a residual current sensitivity of 0.03 A with an efficiency of 30mA. The output voltage is rated at 4 VA DC.

Part#:56220

Manufacturer:Murr Elektronik

Product Lifecycle:Active

In-stock parts: 1

Jul 7, 2024

About the product: Schneider Electric RH10P is a flush-mounted automation part designed for remote reset and test functions. It features instantaneous protection settings at 0.03A and includes digital outputs with an SPDT (Single Pole Double Throw) fault contact and an SPST (Single Pole Single Throw) voltage-presence contact. The supply voltage requirement is AC 50/60Hz at 110-130 V. This part is equipped with earth-leakage protection functions, operates with a minimum current of 0.01 A at 12V minimum load, and has a residual current sensitivity of 0.03 A with an efficiency of 30mA. The output voltage is rated at 4 VA DC.

About the manufacturer: Murr Elektronik is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Murrelektronik is a worldwide frontrunner in creating, producing, and distributing automation solutions. Our product offerings are categorized into four main lines: Power Supplies and Control, Interfaces, Cables/Connectors, and IO Systems.

Check out the 56220 Murr Elektronik price in the box on the right side or send a quick quote.

56220 Product Details

Wire break upper/lower limit overload
per channel via LED and BUS
Short-circuit and overload
yes
Monitoring - no voltage
no
Actuator warning
per channel via LED and BUS
Diagnostic via BUS
per module and channel
Monitoring - under voltage
yes
Fieldbus
Ribbon cable connection
I/O ports
24× spring clamp plug-in terminals, max. 2.5 mm²
Product article number of manufacturer
56220
Diagnostic via LED
per module and channel
Sensor-system/actuator supply
4× spring clamp plug-in terminals, max. 2.5 mm² (max. 12 A)
Input range
±10 V DC, 0...10 V DC
Communication status
via LED
Load
min. 1 kΩ, (EN 61131-2)
Mounting method
DIN-rail mountable (EN 60715)
Conversion time (analog)
max. 1 ms (per channel)
Module supply
via system connection
Temperature range
0...+55 °C (storage temperature -20...+85 °C)
Current consumption
max. 25 mA from system, max. 90 mA externally (UI), idle load
Protection
IP20