54611 Murr Elektronik Electronic Components

54611 Product Details

• Cable break
  per port
• Short-circuit and overload
  yes
• Monitoring - no voltage
  yes
• Monitoring - under voltage
  yes
• Actuator warning
  per channel via LED and BUS
• DLR (Device Level Ring)
  yes
• CIP Sync
  yes
• Diagnostic via BUS
  per module and channel
• Multiple connections
  yes
• Communication status
  via LED
• Product article number of manufacturer
  54611
• Diagnostic via LED
  per module and channel
• Addressing
  DHCP, BOOTP or IP address by DIP switch
• Composite Test Revision
  16
• I/O ports
  M12, 5-pole, A-coded
• PIN 4
  Input/output (port X0...X7); IO-Link master (port X0...X7)
• Sensor-system/actuator supply
  M12 Power, 5-pole, L-coded, 2× max. 16 A
• PIN 2
  Input/Output (port X0...X7); U-Actuator IO-Link Class B (port X0...X7)
• IO-Link
  8× Master
• Fieldbus
  Ethernet 10/100 Mbit/s; M12, D-coded
Operating modes
COM1; COM2; COM3 (automatic)
Transfer parameters
32 Byte (In) 32 Byte (Out) per IO-Link port
Port Class
Class A + B (not galvanically separated)
Specification
IO-Link Master V1.1.3
Monitoring - energy
yes (current and voltage)
Monitoring - temperature
yes
IIoT Interfaces
yes (OPC UA, MQTT, JSON REST API)
Web interface
yes
Type
for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
Actuator supply UA
24 V DC (EN 61131-2), max. 10 A Port X0...X7
Switching current per output
max. 2 A per pin (short-circuit and overload-protected), max. 4 A per port
Sensor supply US
24 V DC (EN 61131-2), max. 2 A load per port, short-circuit and overload protected, total max. 10 A port X0...X7
Dimensions H×W×D
42×63×225 mm
Mounting method
2-hole screw mounting, compatible with I/O modules of MVK model range
Temperature range
-25...+70 °C (storage temperature -40...+80 °C)
Protection
IP67

Product condition

Related documents 54611 Specs