This item can ship within 5 days!

QT40.241

$798.00

PULS QT40.241 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It supports DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit features a DC-OK relay contact output and offers rated currents of 40A at 24Vdc and 34.3A at 28Vdc, with a power derating from 24W at +60°C to +70°C. Connection is facilitated through screw-clamp connections. The supply voltage accommodates a wide range of AC inputs from 323Vac to 576Vac, including nominal values of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a 3-phase input. It has a turn-ON voltage of 3 x 305Vac and a shutdown voltage of 3 x 275Vac in steady-state conditions. The QT40.241, part of the Q-series, measures 110mm in width, 124mm in height, and 127mm in depth, and is housed in aluminium. It is designed for a 3-phase network, with a net width of 110mm. The rated power is 960W at both 24Vdc and 28Vdc, with a short-term capacity of 1440W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a turn-ON overshoot of 500mV. Protection functions include output overvoltage protection, active input inrush current limiting, and overload/short-circuit protection. It supports series or parallel operation for increased output power and is resistant to back-feeding loads up to 35V. The efficiency rates are 0.952 and 0.953 for 3x480Vac and 3x400Vac inputs, respectively. Peak inrush current consumption is 6A for both 3x400Vac and 3x480Vac inputs. The start-up delay ranges from 500 to 600 seconds, with rise times of 35ms and 40ms under nominal input conditions. The hold time is 25ms for both 3x480Vac and 3x400Vac inputs. Power dissipation losses are 48.4W and 47.3W for 3x480Vac and 3x400Vac inputs, respectively, at full output load. Electrical durability varies with temperature and load conditions, offering up to 322,000 hours of operation at 25°C and 20A output under 3AC 400Vac input. The ripple is 100mVpp across a 20Hz to 20MHz range, with an output stage capacitance of 10200µF.

Puls

This item can ship within 5 days!

UBC10.241

$596.31

Verified stock: 14

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

This item can ship within 5 days!

559689

$4.12

Verified stock: 36

Insulator, F-F, ISO 2-1/2”, 3/8-16

Eriflex

This item can ship within 24h!

153007

$3.17

Verified stock: 53

push-in fitting QS-1/4-10 male thread with external hexagon. Size: Standard, Nominal size: 8,5 mm, Type of seal on screw-in stud: coating, Assembly position: Any, Container size: 10

Festo

This item can ship within 5 days!

CS5.241

$232.38

Verified stock: 12

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

This item can ship within 5 days!

PISA11.CLASS2

$144.69

Verified stock: 12

PULS PISA11.CLASS2 is a protection unit designed for DIN rail mounting, featuring a 4-channel protection module with 1 input and 4 outputs. It operates within an ambient air temperature range of -25 to +70°C and adheres to NEC Class 2 design standards. The rated current is 16A, distributed as 4A per channel, with a derating to 0.025A/+60°C to +70°C for each channel. It utilizes screw-clamp connections for secure installation and is part of the PISA11-series. The dimensions are W45mm x H75mm x D91mm, and it requires a supply voltage of 18Vdc to 30Vdc, with 24Vdc being typical and 21.4Vdc needed to turn on the outputs. The output voltage is adjustable between 24Vdc and 28Vdc. Protection functions include short-circuit protection with a 10ms shutdown time and current limitation with an adjustable threshold between 16.6A and 23.6A. Power dissipation at full output load with a 24V input is 1.8W, and the processing time for the turn-on delay of output is 270ms. The voltage drop across the unit is 101mV / 0.101 V. Electrical durability is rated at 216,000 hours at 40°C with a 4x2A output and 610,000 hours at 25°C with a 4x2A output.

Puls

This item can ship within 24h!

QS20.241

$445.92

Verified stock: 6

PULS QS20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The unit provides a rated current of 20A at 24Vdc and 17A at 28Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values listed for both. The QS20.241, part of the Q-series, measures 82mm in width, 124mm in height, and 127mm in depth, and is housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, offers a rated power of 480W with a short-term capacity of 720W for up to 4 seconds, and provides an adjustable DC output voltage of 24Vdc-28Vdc. Protection features include output overvoltage protection and active input inrush current limiting, with overload and short-circuit protection. The unit allows for series or parallel operation for increased output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, and the unit exhibits specific current consumption, time delay, hold time, power dissipation/losses, electrical durability, ripple, and capacitance characteristics as detailed in the specifications.

Puls

This item can ship within 5 days!

QT20.241

$605.08

Verified stock: 8

PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.

Puls

This item can ship within 5 days!

QT40.241

$798.00

Verified stock: 8

PULS QT40.241 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It supports DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit features a DC-OK relay contact output and offers rated currents of 40A at 24Vdc and 34.3A at 28Vdc, with a power derating from 24W at +60°C to +70°C. Connection is facilitated through screw-clamp connections. The supply voltage accommodates a wide range of AC inputs from 323Vac to 576Vac, including nominal values of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a 3-phase input. It has a turn-ON voltage of 3 x 305Vac and a shutdown voltage of 3 x 275Vac in steady-state conditions. The QT40.241, part of the Q-series, measures 110mm in width, 124mm in height, and 127mm in depth, and is housed in aluminium. It is designed for a 3-phase network, with a net width of 110mm. The rated power is 960W at both 24Vdc and 28Vdc, with a short-term capacity of 1440W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a turn-ON overshoot of 500mV. Protection functions include output overvoltage protection, active input inrush current limiting, and overload/short-circuit protection. It supports series or parallel operation for increased output power and is resistant to back-feeding loads up to 35V. The efficiency rates are 0.952 and 0.953 for 3x480Vac and 3x400Vac inputs, respectively. Peak inrush current consumption is 6A for both 3x400Vac and 3x480Vac inputs. The start-up delay ranges from 500 to 600 seconds, with rise times of 35ms and 40ms under nominal input conditions. The hold time is 25ms for both 3x480Vac and 3x400Vac inputs. Power dissipation losses are 48.4W and 47.3W for 3x480Vac and 3x400Vac inputs, respectively, at full output load. Electrical durability varies with temperature and load conditions, offering up to 322,000 hours of operation at 25°C and 20A output under 3AC 400Vac input. The ripple is 100mVpp across a 20Hz to 20MHz range, with an output stage capacitance of 10200µF.

Puls

This item can ship within 5 days!

UBC10.241

$596.31

Verified stock: 14

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

This item can ship within 5 days!

559689

$4.12

Verified stock: 36

Insulator, F-F, ISO 2-1/2”, 3/8-16

Eriflex

This item can ship within 24h!

153007

$3.17

Verified stock: 53

push-in fitting QS-1/4-10 male thread with external hexagon. Size: Standard, Nominal size: 8,5 mm, Type of seal on screw-in stud: coating, Assembly position: Any, Container size: 10

Festo

This item can ship within 5 days!

CS5.241

$232.38

Verified stock: 12

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

This item can ship within 5 days!

PISA11.CLASS2

$144.69

Verified stock: 12

PULS PISA11.CLASS2 is a protection unit designed for DIN rail mounting, featuring a 4-channel protection module with 1 input and 4 outputs. It operates within an ambient air temperature range of -25 to +70°C and adheres to NEC Class 2 design standards. The rated current is 16A, distributed as 4A per channel, with a derating to 0.025A/+60°C to +70°C for each channel. It utilizes screw-clamp connections for secure installation and is part of the PISA11-series. The dimensions are W45mm x H75mm x D91mm, and it requires a supply voltage of 18Vdc to 30Vdc, with 24Vdc being typical and 21.4Vdc needed to turn on the outputs. The output voltage is adjustable between 24Vdc and 28Vdc. Protection functions include short-circuit protection with a 10ms shutdown time and current limitation with an adjustable threshold between 16.6A and 23.6A. Power dissipation at full output load with a 24V input is 1.8W, and the processing time for the turn-on delay of output is 270ms. The voltage drop across the unit is 101mV / 0.101 V. Electrical durability is rated at 216,000 hours at 40°C with a 4x2A output and 610,000 hours at 25°C with a 4x2A output.

Puls

This item can ship within 24h!

QS20.241

$445.92

Verified stock: 6

PULS QS20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The unit provides a rated current of 20A at 24Vdc and 17A at 28Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values listed for both. The QS20.241, part of the Q-series, measures 82mm in width, 124mm in height, and 127mm in depth, and is housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, offers a rated power of 480W with a short-term capacity of 720W for up to 4 seconds, and provides an adjustable DC output voltage of 24Vdc-28Vdc. Protection features include output overvoltage protection and active input inrush current limiting, with overload and short-circuit protection. The unit allows for series or parallel operation for increased output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, and the unit exhibits specific current consumption, time delay, hold time, power dissipation/losses, electrical durability, ripple, and capacitance characteristics as detailed in the specifications.

Puls

This item can ship within 5 days!

QT20.241

$605.08

Verified stock: 8

PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.

Puls

This item can ship within 5 days!

QT40.241

$798.00

Verified stock: 8

PULS QT40.241 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It supports DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit features a DC-OK relay contact output and offers rated currents of 40A at 24Vdc and 34.3A at 28Vdc, with a power derating from 24W at +60°C to +70°C. Connection is facilitated through screw-clamp connections. The supply voltage accommodates a wide range of AC inputs from 323Vac to 576Vac, including nominal values of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a 3-phase input. It has a turn-ON voltage of 3 x 305Vac and a shutdown voltage of 3 x 275Vac in steady-state conditions. The QT40.241, part of the Q-series, measures 110mm in width, 124mm in height, and 127mm in depth, and is housed in aluminium. It is designed for a 3-phase network, with a net width of 110mm. The rated power is 960W at both 24Vdc and 28Vdc, with a short-term capacity of 1440W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a turn-ON overshoot of 500mV. Protection functions include output overvoltage protection, active input inrush current limiting, and overload/short-circuit protection. It supports series or parallel operation for increased output power and is resistant to back-feeding loads up to 35V. The efficiency rates are 0.952 and 0.953 for 3x480Vac and 3x400Vac inputs, respectively. Peak inrush current consumption is 6A for both 3x400Vac and 3x480Vac inputs. The start-up delay ranges from 500 to 600 seconds, with rise times of 35ms and 40ms under nominal input conditions. The hold time is 25ms for both 3x480Vac and 3x400Vac inputs. Power dissipation losses are 48.4W and 47.3W for 3x480Vac and 3x400Vac inputs, respectively, at full output load. Electrical durability varies with temperature and load conditions, offering up to 322,000 hours of operation at 25°C and 20A output under 3AC 400Vac input. The ripple is 100mVpp across a 20Hz to 20MHz range, with an output stage capacitance of 10200µF.

Puls

This item can ship within 5 days!

UBC10.241

$596.31

Verified stock: 14

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

This item can ship within 5 days!

559689

$4.12

Verified stock: 36

Insulator, F-F, ISO 2-1/2”, 3/8-16

Eriflex

This item can ship within 24h!

153007

$3.17

Verified stock: 53

push-in fitting QS-1/4-10 male thread with external hexagon. Size: Standard, Nominal size: 8,5 mm, Type of seal on screw-in stud: coating, Assembly position: Any, Container size: 10

Festo

THQP220 General Electric Industrial Automation Components

Part#:THQP220

Manufacturer:General Electric

Product Details

Product condition

Related documents THQP220 Specs

$18.11

General Electric Disclaimer:

Relevant products

QT40.241

UBC10.241

559689

153007

CS5.241

PISA11.CLASS2

QS20.241

QT20.241

QT40.241

UBC10.241

559689

153007

CS5.241

PISA11.CLASS2

QS20.241

QT20.241

QT40.241

UBC10.241

559689

153007

We are a proud member of: