Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8133354 Festo Servo Amplifiers

Festo 8133354 servo drive CMMT-AS-C7-11A-P3-EC-S1 Mounting type: Mounting plate, bolted, Assembly position: (* Free convection, * Vertical), Product weight: 4100 g, Display: LED green/yellow/red, Control elements: Optional: control unit CDSB
Festo

Part#:8133354

Manufacturer:Festo

Alt. Part#:CMMT-AS-C7-11A-P3-EC-S1

Product Lifecycle:Active

Get a quick Quote!

servo drive CMMT-AS-C7-11A-P3-EC-S1 Mounting type: Mounting plate, bolted, Assembly position: (* Free convection, * Vertical), Product weight: 4100 g, Display: LED green/yellow/red, Control elements: Optional: control unit CDSB

About the manufacturer: Festo is one of the manufacturers that offers Servo Amplifiers that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8133354 Festo price in the box on the right side or send a quick quote.

Product Details

  • Type code
    CMMT-AS
  • Information on max. installation height
    1% power reduction/100 m above 1000 m.
  • Protection class
    I
  • Fieldbus interface, protocol
    EtherCAT
  • Number of floating switching outputs
    1
  • Max. continuous output of the external braking resistor (IEC)
    1500 W
  • Max. short circuit protection of mains
    10 kA
  • Max. current consumption for logic supply with parking brake
    2 A
  • Active PFC
    no
  • Safety function
    Safe brake control (SBC) Safe stop 1 (SS1)
  • Control elements
    Optional: CDSB operating unit
  • Characteristics of digital logic outputs
    Freely configurable in some cases Diagnostic outputs in some cases
  • Max. current of digital logic outputs
    20 mA
  • Nominal operating voltage AC
    400 V
  • Nominal voltage, load supply DC
    560 V
  • Nominal operating voltage phases
    3-phase
  • Surge resistance
    6 kV
  • Max. current consumption for logic supply with clamping brake and I/O
    2.5 A
  • Degree of protection
    IP20
  • Number of analog setpoint inputs
    1
  • Logic input specification
    Based on IEC 61131-2, type 3
  • Characteristics of setpoint inputs
    Differential inputs Configurable for current/force
  • Fieldbus coupling
    EtherCAT
  • Fieldbus interface, transmission rate
    100 Mbit/s
  • Ethernet interface, function
    Parameterization and commissioning
  • Number of high-speed switching outputs
    2
  • Number of diagnostic outputs
    2
  • Number of high-speed logic inputs
    2
  • Time resolution of high-speed logic inputs
    1 µs
  • Time resolution of high-speed switching outputs
    1 µs
  • Controller operating mode
    Cascade control Autotuning
  • Safety integrity level (SIL)
    Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
  • Output frequency
    0 Hz ... 599 Hz
  • Braking resistor, integrated
    47 Ohm
  • Max. length of motor cable without ext. mains filter
    25 m
  • Max. DC link voltage
    800 V
  • Nominal current load supply
    9 A
  • Nominal current per phase, effective
    7 A
  • Mains frequency
    48 Hz ... 62 Hz
  • Load supply permissible range
    ± 10 %
  • Storage temperature
    -25 °C ... 55 °C
  • Relative air humidity
    5 - 90 % Non-condensing
  • Number of digital logic inputs
    12
  • Work range of setpoint input
    ± 10 V
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Mounting position
    Free convection Vertical
  • Ethernet interface, protocol
    TCP/IP
  • Encoder interface, function
    EnDat® 2.1 encoder SIN/COS encoder
  • Overvoltage category
    III
  • Number of inputs for motor temperature sensor
    1
  • Max. output current of holding brake
    1.5 A
  • Max. installation height
    2000 m
  • Based on norm
    EN 50581 EN 62061
  • Display
    LED green/yellow/red
  • Braking resistor, external
    60 Ohm ... 85 Ohm
  • Max. peak current duration
    2 s
  • Controller nominal power
    4000 VA
  • Peak power
    12000 VA
  • Permissible range of logic voltage
    ± 20 %
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • UL-ambient temperature
    0 °C ... 40 °C
  • Product weight
    4100 g
  • Number of digital logic outputs 24 V DC
    6
  • Encoder interface output, characteristics
    1 MHz maximum output frequency max. 16384 ppr
  • Encoder interface input, characteristics
    1 MHz maximum output frequency max. 16384 ppr
  • Type of mounting
    Mounting plate, screwed on
  • Fieldbus interface, connection technology
    RJ45
  • Fieldbus interface, connection type
    2x socket
  • Pulse energy for braking resistor
    1200 Ws
  • Braking resistor nominal power (IEC)
    100 W
  • Conforms to standard
    EN 61800-3 EN ISO 13849-1
  • Performance Level (PL)
    Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
  • Output voltage range AC
    3x (0 – input) V
  • Pulse power of braking resistor
    13.6 kVA
  • Nominal voltage, logic supply DC
    24 V
  • SFF safe failure fraction
    99 %
  • Peak current per phase, effective
    21 A
  • Contamination level
    2
  • Certificate issuing authority
    German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
  • Note on ambient temperature
    Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
  • Ambient temperature
    0 °C ... 50 °C
  • Communication profile
    CiA402 FoE (File over EtherCAT)
  • Process interfacing
    I/O mode for 256 positioning blocks Interpolated mode CSV
  • Operating range of analog inputs
    ± 10 V
  • Characteristics of logic input
    Freely configurable in some cases Not galvanically isolated
  • Switching logic at outputs
    PNP (positive switching)
  • Fieldbus interface, function
    Bus connection, incoming/forwarding EtherCAT® slave
  • KC characters
    KC EMC
  • Mains types
    TN IT
  • Encoder interface 2, function
    Incremental encoder SIN/COS encoder
  • Synchronization interface, function
    Encoder emulation A/B/Z Encoder input A/B/Z
  • Max. current of the floating switching outputs
    50 mA
  • System voltage to EN 61800-5-1
    300 V
  • Number of safe 2-pin inputs
    2
  • Max. voltage drop from logic supply to brake output
    1 V
  • Mode of operation
    Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
  • Line filter
    Integrated
  • Diagnostic coverage
    97 %
  • Impedance of setpoint input
    70 kOhm
  • Hardware fault tolerance
    1
  • Input voltage range AC
    200 V ... 480 V
  • Peak current, load supply
    27 A
  • Max. current consumption for logic supply without clamping brake
    0.5 A
  • Permissible voltage fluctuations
    +/- 10 %
  • Certification
    RCM compliance mark c UL us - Listed (OL)
  • Work range of logic input
    -3 V ... 30 V
  • Input switching logic
    PNP (positive switching)

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8133354 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo