8133352 Festo Servo Amplifiers
Part#:8133352
Manufacturer:Festo
Alt. Part#:CMMT-AS-C7-11A-P3-PN-S1
Product Lifecycle:Active
Get a quick Quote!
servo drive CMMT-AS-C7-11A-P3-PN-S1 Mounting type: Mounting plate, bolted, Assembly position: (* Free convection, * Vertical), Product weight: 4100 g, Display: LED green/yellow/red, Control elements: Optional: control unit CDSB
About the manufacturer: Festo is one of the manufacturers that offers Servo Amplifiers that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8133352 Festo price in the box on the right side or send a quick quote.
Product Details
- Fieldbus interface, transmission rate 100 Mbit/s
- Ethernet interface, function Parameterization and commissioning
- Fieldbus interface, connection type 2x socket
- Number of inputs for motor temperature sensor 1
- Number of high-speed logic inputs 2
- Number of safe 2-pin inputs 2
- Max. current consumption for logic supply with parking brake 2 A
- Based on norm EN 50581 EN 62061
- Safety integrity level (SIL) Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
- Output frequency 0 Hz ... 599 Hz
- Impedance of setpoint input 70 kOhm
- Pulse power of braking resistor 13.6 kVA
- Max. DC link voltage 800 V
- Nominal voltage, load supply DC 560 V
- Mains frequency 48 Hz ... 62 Hz
- Peak power 12000 VA
- Peak current, load supply 27 A
- Load supply permissible range ± 10 %
- Certificate issuing authority German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
- Degree of protection IP20
- Number of analog setpoint inputs 1
- Logic input specification Based on IEC 61131-2, type 3
- Operating range of analog inputs ± 10 V
- Ethernet interface, protocol TCP/IP
- Protection class I
- Encoder interface 2, function Incremental encoder SIN/COS encoder
- Number of floating switching outputs 1
- Pulse energy for braking resistor 1200 Ws
- Max. voltage drop from logic supply to brake output 1 V
- Conforms to standard EN 61800-3 EN ISO 13849-1
- Controller operating mode Cascade control Autotuning
- Display LED green/yellow/red
- Output voltage range AC 3x (0 – input) V
- Max. current of digital logic outputs 20 mA
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature 0 °C ... 50 °C
- UL-ambient temperature 0 °C ... 40 °C
- Number of digital logic inputs 12
- Encoder interface output, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Mounting position Free convection Vertical
- Mains types TN IT
- Fieldbus interface, protocol PROFINET IRT PROFINET RT
- Number of diagnostic outputs 2
- Max. short circuit protection of mains 10 kA
- Braking resistor nominal power (IEC) 100 W
- Active PFC no
- Mode of operation Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
- Control elements Optional: CDSB operating unit
- Hardware fault tolerance 1
- Max. length of motor cable without ext. mains filter 25 m
- Input voltage range AC 200 V ... 480 V
- Nominal current per phase, effective 7 A
- Max. current consumption for logic supply without clamping brake 0.5 A
- Contamination level 2
- Storage temperature -25 °C ... 55 °C
- Product weight 4100 g
- Work range of setpoint input ± 10 V
- Encoder interface input, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Switching logic at outputs PNP (positive switching)
- Type of mounting Mounting plate, screwed on
- Fieldbus interface, function Bus connection, incoming/forwarding PROFINET slave
- Information on max. installation height 1% power reduction/100 m above 1000 m.
- Encoder interface, function EnDat® 2.1 encoder SIN/COS encoder
- Overvoltage category III
- Number of high-speed switching outputs 2
- Max. current of the floating switching outputs 50 mA
- Max. output current of holding brake 1.5 A
- Max. installation height 2000 m
- Time resolution of high-speed switching outputs 1 µs
- Line filter Integrated
- Braking resistor, external 60 Ohm ... 85 Ohm
- Characteristics of digital logic outputs Freely configurable in some cases Diagnostic outputs in some cases
- Max. peak current duration 2 s
- Nominal voltage, logic supply DC 24 V
- Nominal operating voltage phases 3-phase
- Surge resistance 6 kV
- Permissible range of logic voltage ± 20 %
- Note on ambient temperature Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
- Number of digital logic outputs 24 V DC 6
- Work range of logic input -3 V ... 30 V
- Characteristics of setpoint inputs Differential inputs Configurable for current/force
- Fieldbus coupling PROFINET
- Type code CMMT-AS
- KC characters KC EMC
- Fieldbus interface, connection technology RJ45
- Synchronization interface, function Encoder emulation A/B/Z Encoder input A/B/Z
- Max. continuous output of the external braking resistor (IEC) 1500 W
- System voltage to EN 61800-5-1 300 V
- Time resolution of high-speed logic inputs 1 µs
- Safety function Safe brake control (SBC) Safe stop 1 (SS1)
- Performance Level (PL) Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
- Braking resistor, integrated 47 Ohm
- Diagnostic coverage 97 %
- Nominal operating voltage AC 400 V
- Controller nominal power 4000 VA
- Nominal current load supply 9 A
- SFF safe failure fraction 99 %
- Max. current consumption for logic supply with clamping brake and I/O 2.5 A
- Peak current per phase, effective 21 A
- Permissible voltage fluctuations +/- 10 %
- Relative air humidity 5 - 90 % Non-condensing
- Certification RCM compliance mark c UL us - Listed (OL)
- Communication profile PROFIdrive PROFIenergy
- Process interfacing AC1: Adjustable-Speed Drives AC4: Synchronous Servo Application
- Input switching logic PNP (positive switching)
- Characteristics of logic input Freely configurable in some cases Not galvanically isolated
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8133352 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨