8104669 Festo Pneumatic Components

8104669 Product Details

• Electrical connection 1, function
  Actual value output Power supply
• Display size
  1.77"
• Max. cable length
  30 m
• Total leakage
  5 l/h
• Input resistance
  100 kOhm
• Hysteresis
  0.4 %FS
• Sound power level at a distance of 1 m
  51.9 dB(A)
• Exhaust nominal width
  5 mm
• Sealing principle
  Soft
• Valve function
  3-way proportional pressure control valve
• Max. current consumption
  525 mA
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Type of mounting
  With through-hole for M4 screw With H-rail
• Housing material
  PA-reinforced
• Electrical connection 1, connection technology
  M12x1 A-coded as per EN 61076-2-101
• Setpoint input
  0 - 10 V Digital
• Display resolution
  128x160 pixels
• Climatic category
  3K3 as per EN 60721
• Electrical connection 1, tightening torque
  1.5 Nm
Sound power level
62.5 dB(A)
Inlet pressure 1 MPa
0 MPa ... 1.3 MPa
Design
Poppet valve with return spring
Symbol
00997299
Inlet pressure 1
0 bar ... 13 bar
Nominal operating voltage DC
24 V
Information on operating and pilot media
Operation with oil lubrication not possible
Temperature of medium
0 °C ... 50 °C
Degree of protection
IP65
Pneumatic connection 2
G1/8
Nominal width pressurization
5 mm
Flow direction
Non-reversible
Electrical connection for input 1, connection pattern
00994083
Dimensions W x L x H
42.2 mm x 95.3 mm x 94.3 mm
Min. load resistance of voltage output
2 kOhm
Linearity
0.9 %FS
Pressure regulation range MPa
0 MPa ... 1 MPa
Actuation type
Electrical
Safety instructions
Safety position VPPI, normally closed
Display type
Color TFT
Operating pressure
10 bar ... 12 bar
Pressure regulation range
0 bar ... 10 bar
Analog output signal range
0 - 10 V
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Ambient temperature
0 °C ... 50 °C
Temperature coefficient
0.02 %/K
Note on materials
RoHS-compliant
KC characters
KC EMC
Application note
The product is suitable for industrial purposes only. Radio interference suppression measures may be required in residential areas.
Nominal altitude of use above sea level
< 3000 m NHN
Max. tightening torque of pneumatic fitting
8.5 Nm
Storage temperature
-20 °C ... 70 °C
Burst pressure
40 bar
Nominal current
0.15 A
Standard nominal flow rate 2-3
750 l/min
Short-circuit protection
For all electrical connections
Reset method
Mechanical spring
Standard nominal flow rate
1400 l/min
DC operating voltage range
20.4 V ... 27.6 V
Switching output
Push-pull
Certification
RCM compliance mark
Pneumatic connection 1
G1/8
Seals material
HNBR PTFE
Electrical connection 1, connection type
Plug
Precision analog output in ± %FS
1 %FS
Electrical connection 1, number of pins/wires
5
Overall accuracy
1.1 %FS
Max. output current
25 mA
Reproducibility
0.4 %FS
Type code
VPPI
Mounting position
Any
Reverse polarity protection
for all electrical connections
Type of control
Direct
Max. electrical power consumption
14.5 W
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Product weight
370 g
Pneumatic connection 3
G1/8

Product condition

Related documents 8104669 Specs