8086608 Festo Electrical Peripheral Devices
Part#:8086608
Manufacturer:Festo
Alt. Part#:CPX-AP-I-PB-M12
Product Lifecycle:Active
Get a quick Quote!
About the product: PROFIBUS interface CPX-AP-I-PB-M12 Dimensions W x L x H: 45 mm x 170 mm x 35 mm, Diagnostics via LED: (* Buffer error LED (BF), * Diagnostics per module, * Power supply electronics/sensors, * Power supply load, * System diagnostics, * Maintenance required
About the manufacturer: Festo is one of the manufacturers that offers Electrical Peripheral Devices that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8086608 Festo price in the box on the right side or send a quick quote.
8086608 Product Details
- Fieldbus interface, connection technology M12x1, B-coded as per EN 61076-2-101
- Fieldbus interface, connection type Plug
- Power supply, connection technology M8x1, A-coded as per EN 61076-2-104
- Diagnostics via bus Load switch-off Communication with AP module interrupted
- Intrinsic current consumption at nominal operating voltage for electronics/sensors Typically 80 mA
- Voltage forwarding, connection type Socket
- Communication interface, protocol AP-COM
- Voltage forwarding, function Outgoing electronics/sensors and load
- Nominal operating voltage DC load 24 V
- Communication interface, number of pins/wires 4
- Fieldbus interface 2, protocol PROFIBUS DP-V1
- Note on fieldbus interface Terminating resistor on socket possible
- Fieldbus interface 2, number of poles/wires 5
- Certification RCM compliance mark
- Dimensions W x L x H 45 mm x 170 mm x 35 mm
- Note on degree of protection Unused connections sealed
- Intrinsic current consumption at nominal operating voltage load Typically 5 mA
- Power supply, type of connection Plug
- Communication interface, shielding yes
- Fieldbus interface, number of poles/wires 5
- Power failure buffering 10 ms
- Fieldbus interface 2, connection technology M12x1, B-coded as per EN 61076-2-101
- Fieldbus interface 2, connection type Socket
- CE marking (see declaration of conformity) As per EU EMC directive
- Degree of protection IP65 IP67
- Type of mounting With through-hole
- KC characters KC EMC
- Communication interface, connection technology M8x1, D-coded as per EN 61076-2-114
- Fieldbus interface, function Incoming bus connection
- Relative air humidity 5 - 95 % Non-condensing
- Communication interface, function System communication XF20 OUT / XF21 OUT
- Max. cable length 50 m system communication
- Fieldbus interface, transmission rate 9.6 kbit/s 12 Mbit/s
- Max. address capacity outputs 244 byte
- Power supply, number of pins/wires 4
- Max. address capacity inputs 244 byte
- Fieldbus interface 2, function Bus connection, forwarding
- Reverse polarity protection yes
- Type code CPX-AP-I
- Product weight 186 g
- Fieldbus interface, type PROFIBUS
- Permissible voltage fluctuations for electronics/sensors ± 25 %
- Communication interface, connection type 2x socket
- Configuration support GSD file
- Diagnostics via LED Buffer error LED (BF) Maintenance required
- Voltage forwarding, number of pins/wires 4
- Note regarding operating voltage SELV/PELV fixed power supplies required Note voltage drop
- Fieldbus interface 2, type PROFIBUS
- Storage temperature -40 °C ... 70 °C
- Note on materials RoHS-compliant
- Max. power supply 2 x 4 A (external fuse required)
- Power supply, function Incoming electronics/sensors and load
- Voltage forwarding, connection technology M8x1, A-coded as per EN 61076-2-104
- Fieldbus interface, galvanic isolation yes
- Fieldbus interface, protocol PROFIBUS DP-V1
- Permissible voltage fluctuations load ± 25 %
- Nominal operating voltage DC for electronics/sensors 24 V
- Max. number of modules 56
- Fieldbus interface 2, galvanic isolation yes
- Fieldbus interface 2, transmission rate 1.5 mbps 93.75 kbps
- Corrosion resistance class (CRC) 1 - Low corrosion stress
- Ambient temperature -20 °C ... 50 °C
- Housing material PA Die-cast zinc, nickel-plated
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8086608 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8086608
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
