8086605 Festo Electrical Peripheral Devices

8086605 Product Details

• Communication interface, connection technology
  M8x1, D-coded as per EN 61076-2-114
• Power supply, type of connection
  Plug
• Electrical isolation of inputs between channels
  no
• Electrical connection, input, number of pins/wires
  3
• Nominal operating voltage DC for electronics/sensors
  24 V
• Max. residual current of inputs per module
  0.8 A
• Input switching logic
  PNP (positive switching) 3-wire sensors as per IEC 61131-2
• Housing material
  PA Die-cast zinc, nickel-plated
• Diagnose per internal communication
  Short circuit/overload in sensor supply Electronics/sensors undervoltage
• Power supply, function
  Incoming electronics/sensors and load
• Communication interface, function
  System communication XF10 IN
• Electrical input connection, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Electrical connection input, connection type
  4x socket
• Note regarding operating voltage
  SELV/PELV fixed power supplies required Note voltage drop
• Switching level
  Signal 0: <= 5 V Signal 1: >= 11 V
• Input debounce time
  0.1 ms 20 ms
• Degree of protection
  IP65 IP67
• Note on materials
  RoHS-compliant
• KC characters
  KC EMC
• Fuse protection inputs (short circuit)
  Internal electronic fuse per module
Permissible voltage fluctuations for electronics/sensors
± 25 %
Relative air humidity
5 - 95 % Non-condensing
Max. cable length
30 m inputs 50 m system communication
Communication interface, protocol
AP-COM
Power supply, number of pins/wires
4
Reverse polarity protection
yes
CE marking (see declaration of conformity)
As per EU EMC directive
Ambient temperature
-20 °C ... 50 °C
Product weight
81 g
Type of mounting
With through-hole
Dimensions W x L x H
30 mm x 102.5 mm x 35 mm
Note on degree of protection
Unused connections sealed
Power supply, connection technology
M8x1, A-coded as per EN 61076-2-104
Communication interface, connection type
Socket
Electrical connection input, function
Digital input
Communication interface, shielding
yes
Communication interface, number of pins/wires
4
Type code
CPX-AP-I
Storage temperature
-40 °C ... 70 °C
Certification
RCM compliance mark
Max. power supply
2 x 4 A (external fuse required)
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 32 mA
Diagnostics via LED
Diagnostics per module Status per channel
Digital inputs, electrical isolation of input - internal communication
yes
No. of inputs
4
Power failure buffering
10 ms
Corrosion resistance class (CRC)
1 - Low corrosion stress
Input characteristics
As per IEC 61131-2, type 3

Product condition

Related documents 8086605 Specs