8086603 Festo Electrical Peripheral Devices

8086603 Product Details

• Diagnose per internal communication
  Load switch-off Load undervoltage
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Electrical connection output, connection technology
  M12x1 A-coded as per EN 61076-2-101
• Digital inputs, electrical isolation of input - internal communication
  yes
• Electrical isolation of outputs between channel - internal communication
  yes
• Nominal operating voltage DC for electronics/sensors
  24 V
• Electrical output connection, number of pins/wires
  5
• Max. residual current of outputs per module
  2 A
• Switching level
  Signal 0: <= 5 V Signal 1: >= 11 V
• Degree of protection
  IP65 IP67
• Characteristic curve outputs
  As per IEC 61131-2, type 0.5
• Input characteristics
  As per IEC 61131-2, type 3
• KC characters
  KC EMC
• Note on degree of protection
  Unused connections sealed
• Power supply, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Relative air humidity
  5 - 95 % Non-condensing
• Communication interface, connection type
  2x socket
• Communication interface, function
  System communication XF10 IN / XF20 OUT
• Communication interface, protocol
  AP-COM
• Diagnostics via LED
  Diagnostics per module Status per channel
Voltage forwarding, function
Outgoing electronics/sensors and load
Voltage forwarding, number of pins/wires
4
Power supply, number of pins/wires
4
Nominal operating voltage DC load
24 V
Note regarding operating voltage
SELV/PELV fixed power supplies required Note voltage drop
Corrosion resistance class (CRC)
1 - Low corrosion stress
Product weight
129 g
Type of mounting
With through-hole
Housing material
PA Die-cast zinc, nickel-plated
Fuse protection inputs (short circuit)
Internal electronic fuse per module
Power supply, function
Incoming electronics/sensors and load
Information on max. cable length
Power supply according to nominal voltage
Power supply, type of connection
Plug
Electrical isolation of inputs between channels
no
Electrical connection input, connection type
2x socket
Electrical connection, input, number of pins/wires
5
Max. residual current of inputs per module
1.8 A
CE marking (see declaration of conformity)
As per EU EMC directive
Input switching logic
PNP (positive switching) 3-wire sensors as per IEC 61131-2
Max. power supply
2 x 4 A (external fuse required)
Fuse protection outputs (short circuit)
Internal electronic fuse per channel
Voltage forwarding, connection technology
M8x1, A-coded as per EN 61076-2-104
Intrinsic current consumption at nominal operating voltage load
Typically 10 mA
Max. power supply per channel
0.5 A
Voltage forwarding, connection type
Socket
Electrical connection input, function
Digital input
Electrical connection output, function
Digital output
Communication interface, shielding
yes
Communication interface, number of pins/wires
4
Reverse polarity protection
yes
Type code
CPX-AP-I
Ambient temperature
-20 °C ... 50 °C
Switching logic at outputs
PNP (positive switching)
Dimensions W x L x H
30 mm x 170 mm x 35 mm
Electrical connection output, connection type
2x socket
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Electrical isolation of outputs between channels
no
Output delay with resistive load
Signal change 0->1: < 200 µs Signal change 1->0: < 200 µs
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 35 mA
Max. cable length
30 m outputs 50 m system communication
Permissible voltage fluctuations load
± 25 %
Electrical input connection, connection technology
M12x1 A-coded as per EN 61076-2-101
No. of outputs
4
No. of inputs
4
Power failure buffering
10 ms
Input debounce time
0.1 ms 20 ms
Storage temperature
-40 °C ... 70 °C
Certification
RCM compliance mark
Note on materials
RoHS-compliant

Product condition

Related documents 8086603 Specs