8069731 Festo Pneumatic Components
Part#:8069731
Manufacturer:Festo
Alt. Part#:EMCA-EC-67-S-1TM-EC
Product Lifecycle:Active
Get a quick Quote!
Integrated Drive EMCA-EC-67-S-1TM-EC Controller operating mode: (* PWM-MOSFET power output stage, * Cascade controller with, * P position controller, * PI speed controller, * Proportional and integral controller for electricity), Configuration support: ES
About the manufacturer: Festo is one of the manufacturers that offers Pneumatic Components that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8069731 Festo price in the box on the right side or send a quick quote.
Product Details
- Topologies Star Line
- Rotor position sensor Absolute encoder, multi-turn
- Max. rotational speed 3500 1/min
- Performance Level (PL) Safe torque off (STO)/category 3, performance level d
- Nominal rotary speed 3100 1/min
- DC nominal voltage 24 V
- Protocol EtherCAT
- Motor peak power 158 W
- Configuration support ESI file
- Minimum cycle time 2 ms
- Display LED
- Diagnostic coverage 90 %
- Additional functions CoE (CSP only) Variable PDO mapping
- Baud rate 10/100 Mbit/s (full/half)
- Safety function Safe torque off (STO)
- Braking resistor, external 6 Ohm
- Max. current of digital logic outputs 100 mA
- Nominal current 6.9 A
- Parameterization interface Ethernet
- CE marking (see declaration of conformity) As per EU EMC directive as per EU machinery directive
- KC characters KC EMC
- Type code EMCA
- Rotor position sensor measuring principle Magnetic
- Characteristics of digital logic outputs Freely configurable in some cases Not galvanically isolated
- Max. positive test pulse with 0 signal 10000 µs
- SFF safe failure fraction > 90 %
- Max. number of positioning sets 64
- Media redundancy Ring redundancy
- Controller operating mode PWM MOSFET power output stage PI current regulator
- Protective function I²t monitoring Software end position detection
- Safety integrity level (SIL) Safe torque off (STO)/SIL 2
- Hardware fault tolerance 1
- Motor nominal power 120 W
- Rotor position sensor resolution 12 bit
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Degree of protection IP54
- Permissible radial shaft load 100 N
- Peak torque 0.85 Nm
- PFH 1.0E-9
- Work range of logic input 24 V
- Product weight 1925 g
- Max. negative test pulse on 1 signal 600 µs
- Absolute encoder operating time With external battery: max. 6 months Note: the maximum service life of the battery depends its state of charge, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to a maximum of 7 days (best case) Note: Maximum s
- Peak current 10.2 A
- Permissible voltage fluctuations +/- 20 %
- Relative air humidity 0 - 95 % Non-condensing
- Note on ambient temperature Above an ambient temperature of 20 °C, the power must be reduced by 1.75% per °C.
- PFD 1.86E-5
- Communication profile CiA402 FHPP
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Ambient temperature 0 °C ... 50 °C
- Rotor mass moment of inertia 0.175 kgcm²
- Nominal torque 0.37 Nm
- Number of digital logic outputs 24 V DC 2
- Ethernet, supported protocols TCP/IP
- Certificate issuing authority German Technical Control Board (TÜV) 01/205/5514.00/16 UL E331130
- Certification RCM compliance mark c UL us - Recognized (OL)
- Number of digital logic inputs 2
- Characteristics of logic input Galvanically connected to logic potential
- Storage temperature -25 °C ... 70 °C
- Permissible axial shaft load 60 N
- Proof test interval 20 y
- Logic input specification Based on IEC 61131-2
- Input switching logic PNP (positive switching)
- Type of mounting Screwed tightly With through-hole
- Switching logic at outputs PNP (positive switching)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8069731 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
