8069728 Festo Pneumatic Components
Part#:8069728
Manufacturer:Festo
Alt. Part#:EMCA-EC-67-M-1TM-PN
Product Lifecycle:Active
Get a quick Quote!
About the product: Integrated Drive EMCA-EC-67-M-1TM-PN Controller operating mode: (* PWM-MOSFET power output stage, * Cascade controller with, * P position controller, * PI speed controller, * Proportional and integral controller for electricity), Configuration support: GS
About the manufacturer: Festo is one of the manufacturers that offers Pneumatic Components that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8069728 Festo price in the box on the right side or send a quick quote.
8069728 Product Details
- IP address allocation FCT DCP
- Baud rate 10/100 Mbit/s (full/half)
- Rotor position sensor measuring principle Magnetic
- Nominal rotary speed 3150 1/min
- Max. negative test pulse on 1 signal 600 µs
- DC nominal voltage 24 V
- Nominal current 7.2 A
- Media redundancy MRP
- Rotor position sensor Absolute encoder, multi-turn
- Safety integrity level (SIL) Safe torque off (STO)/SIL 2
- Braking resistor, external 6 Ohm
- Hardware fault tolerance 1
- Parameterization interface Ethernet
- Peak current 10.3 A
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Ambient temperature 0 °C ... 50 °C
- Peak torque 0.91 Nm
- Number of digital logic outputs 24 V DC 2
- Characteristics of logic input Galvanically connected to logic potential
- Switching logic at outputs PNP (positive switching)
- Safety function Safe torque off (STO)
- Display LED
- Max. positive test pulse with 0 signal 10000 µs
- SFF safe failure fraction > 90 %
- Rotor position sensor resolution 12 bit
- Certificate issuing authority German Technical Control Board (TÜV) 01/205/5514.00/16 UL E331130
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- KC characters KC EMC
- Configuration support GSDML file
- Controller operating mode PWM MOSFET power output stage PI current regulator
- Protective function I²t monitoring Software end position detection
- Max. rotational speed 3300 1/min
- Max. current of digital logic outputs 100 mA
- Motor nominal power 150 W
- Max. number of positioning sets 64
- Additional functions Conformance class B SNMP
- Topologies Star Line
- Minimum cycle time 2 ms
- Type code EMCA
- Performance Level (PL) Safe torque off (STO)/category 3, performance level d
- Diagnostic coverage 90 %
- Characteristics of digital logic outputs Freely configurable in some cases Not galvanically isolated
- Protocol PROFINET
- Permissible voltage fluctuations +/- 20 %
- Storage temperature -25 °C ... 70 °C
- Certification RCM compliance mark c UL us - Recognized (OL)
- Rotor mass moment of inertia 0.301 kgcm²
- Permissible axial shaft load 60 N
- Work range of logic input 24 V
- Input switching logic PNP (positive switching)
- Absolute encoder operating time With external battery: max. 6 months Note: the maximum service life of the battery depends its state of charge, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to a maximum of 7 days (best case) Note: Maximum s
- CE marking (see declaration of conformity) As per EU EMC directive as per EU machinery directive
- Note on ambient temperature Above an ambient temperature of 20 °C, the power must be reduced by 1.75% per °C.
- PFH 1.0E-9
- Product weight 2285 g
- Logic input specification Based on IEC 61131-2
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Motor peak power 200 W
- Relative air humidity 0 - 95 % Non-condensing
- Degree of protection IP54
- PFD 1.86E-5
- Number of digital logic inputs 2
- Communication profile FHPP
- Type of mounting Screwed tightly With through-hole
- Nominal torque 0.45 Nm
- Permissible radial shaft load 100 N
- Proof test interval 20 y
- Ethernet, supported protocols TCP/IP
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8069728 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8069728
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
