8036884 Festo Flow Sensors

Product Details

• Certification
  RCM compliance mark c UL us - Listed (OL)
• Note on materials
  RoHS-compliant
• Temperature measuring range start value
  0 °C
• Nominal temperature
  23 °C
• Repetition accuracy of flow rate value
  < ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
• Temperature co-efficient margin in ± %FS/K
  Typ. ±0.05% FS/K
• Temperature characteristic curve start value
  0 °C
• Short-circuit protection
  yes
• IO-Link®, function classes
  Binary data channel (BDC) Teach channel
• IO-Link®, SIO mode support
  Yes
• IO-Link®, service data contents IN
  32 bit volume measurement
• Max. cable length
  20 m for IO-Link® operation 30 m
• Product weight
  400 g
• Type code
  SFAW
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Flow direction
  Unidirectional P1 -> P2
• Flow measuring range end value
  32 l/min
• Information on operating pressure
  Max. 12 bar at 40°C Max. 6 bar at 100 °C
• Temperature of medium
  0 °C ... 90 °C
• Ambient temperature
  0 °C ... 50 °C
Switching function
Window comparator Freely programmable
Switching element function
N/C contact/N/O contact switchable
Temperature characteristic curve end value
100 °C
Protocol
IO-Link®
IO-Link®, profile
Smart sensor profile
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data content IN
1 bit BDC (temperature monitoring) 2 bit BDC (flow monitoring)
IO-Link®, data memory required
500 byte
Symbol
00995566
Method of measurement
Flow rate: vortex Temperature: PT1000
Temperature measuring range end value
90 °C
Accuracy of flow rate
±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
Analog output
0 - 10 V 1 - 5 V
Max. load resistance of current output
500 Ohm
IO-Link®, port class
A
Electrical connection
5-pin Plug, straight
DC operating voltage range
18 V ... 30 V
Materials in contact with the media
EPDM (peroxide) PA6T/6I-reinforced
Operating pressure
0 bar ... 12 bar
Operating medium
Liquid media Neutral liquids
Accuracy of temperature in ± °C
2 °C
Max. output current
100 mA
Flow characteristic curve, start value
0 l/min
Min. load resistance of voltage output
15 kOhm
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width IN
5 Byte
IO-Link®, minimum cycle time
5 ms
Mounting position
Any
Corrosion resistance class (CRC)
3 - High corrosion stress
KC characters
KC EMC
Measured variable
Flow rate Temperature
Flow measuring range start value
1.8 l/min
Information on operating and pilot media
Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, end value
32 l/min
Overload protection
Available
IO-Link®, process data width OUT
0 Byte
Reverse polarity protection
for all electrical connections
Fluid connector
Terminal connection DIN 32676 DN10
Displayable unit(s)
US gal °F
Housing material
PA-reinforced
Degree of protection
IP65

Related documents 8036884 Specs