8036876 Festo Flow Sensors

8036876 Product Details

• Type code
  SFAW
• Method of measurement
  Flow rate: vortex Temperature: PT1000
• Flow measuring range end value
  100 l/min
• Information on operating and pilot media
  Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
• Repetition accuracy of flow rate value
  < ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
• Switching element function
  N/C contact/N/O contact switchable
• Max. load resistance of current output
  500 Ohm
• Short-circuit protection
  yes
• IO-Link®, function classes
  Binary data channel (BDC) Teach channel
• IO-Link®, process data content IN
  1 bit BDC (temperature monitoring) 2 bit BDC (flow monitoring)
• IO-Link®, port class
  A
• Reverse polarity protection
  for all electrical connections
• Mounting position
  Any
• Degree of protection
  IP65
• Note on materials
  RoHS-compliant
• Flow measuring range start value
  5 l/min
• Information on operating pressure
  Max. 12 bar at 40°C Max. 6 bar at 100 °C
• Temperature of medium
  0 °C ... 90 °C
• Accuracy of temperature in ± °C
  2 °C
• Switching function
  Window comparator Freely programmable
Temperature characteristic curve end value
100 °C
Min. load resistance of voltage output
15 kOhm
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width OUT
0 Byte
IO-Link®, minimum cycle time
5 ms
Max. cable length
20 m for IO-Link® operation 30 m
Displayable unit(s)
US gal °F
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Measured variable
Flow rate Temperature
Temperature measuring range end value
90 °C
Temperature measuring range start value
0 °C
Ambient temperature
0 °C ... 50 °C
Nominal temperature
23 °C
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, end value
100 l/min
Overload protection
Available
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, service data contents IN
32 bit volume measurement
IO-Link®, data memory required
500 byte
Fluid connector
Internal thread G3/4
Materials in contact with the media
EPDM (peroxide) PA6T/6I-reinforced
Accuracy of flow rate
±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
Max. output current
100 mA
Temperature characteristic curve start value
0 °C
IO-Link®, profile
Smart sensor profile
IO-Link®, process data width IN
5 Byte
DC operating voltage range
18 V ... 30 V
Electrical connection
5-pin Plug, straight
Product weight
530 g
Symbol
00995566
Certification
RCM compliance mark c UL us - Listed (OL)
Flow direction
Unidirectional P1 -> P2
Operating pressure
0 bar ... 12 bar
Operating medium
Liquid media Neutral liquids
Temperature co-efficient margin in ± %FS/K
Typ. ±0.05% FS/K
Analog output
0 - 10 V 1 - 5 V
Flow characteristic curve, start value
0 l/min
Protocol
IO-Link®
IO-Link®, SIO mode support
Yes
Housing material
PA-reinforced
Corrosion resistance class (CRC)
3 - High corrosion stress

Product condition

Related documents 8036876 Specs