572080 Festo Directional Control Valves

572080 Product Details

• KC characters
  KC EMC
• Actuation type
  Electrical
• Design
  Poppet valve without return spring
• Width dimension
  10.5 mm
• Mounting position
  Any
• Standard nominal flow rate
  50 l/min
• Degree of protection
  IP65
• Sealing principle
  Hard
• Symbol
  00992259
• C value
  0.2 l/sbar
• Switching time off at 4 bar and 24 V in new condition
  1 ms
• Switching time off at 8 bar and 24 V in new condition
  0.9 ms
• DC operating voltage range
  21.6 V ... 26.4 V
• Trigger signal range DC
  3 V ... 30 V
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Permissible solenoid surface temperature
  120 °C
• Max. tightening torque for valve mounting
  0.7 Nm
• Type of mounting
  On sub-base
• Material of cable sheath
  PUR
• Valve function
  2/2, closed, monostable
Operating pressure
0.5 bar ... 8 bar
Operating voltage
24V DC
Certification
RCM compliance mark
Type of control
Direct
Additional functions
Spark suppression Safety shut-down
Switching time on at 4 bar and 24 V in new condition
0.8 ms
Switching time on at 8 bar and 24 V in new condition
0.9 ms
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive
Product weight
75 g
Pneumatic connection 1
Sub-base
Pneumatic connection 2
Sub-base
Input resistance
34 kOhm
Width
10 mm
Reset method
Pneumatic spring
Type code
MHJ10
Manual override
None
Reverse polarity protection
for operating voltage
Max. switching frequency
500 Hz
Switching time off at 0.5 bar and 24 V in new condition
0.9 ms
Tolerance for ON switching time
+/-15 %
Restricted ambient and media temperature
Depending on the switching frequency (see diagram)
Ambient temperature
-5 °C ... 60 °C
Seals material
HNBR
Note on input current
Linear increase 0.44-15.44 mA for a trigger signal of 15-30 V
Pneumatic working port
Sub-base
Information on operation
Power supply unit must be able to supply at least 1.7 A without voltage drop. For block assembly with flow rate at max. ambient temperature 45 °C.
Flow direction
Non-reversible
b-value
0.5
Switching time on at 0.5 bar and 24 V in new condition
0.7 ms
Tolerance for switching time off
+15 %/-25 %
Coil characteristics
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media
Operation with oil lubrication not possible
Electrical connection
3-wire Cable
Housing material
PA-reinforced PPS-reinforced
Permissible voltage fluctuations
+/- 10 %
Storage temperature
-20 °C ... 50 °C
Temperature of medium
-5 °C ... 60 °C
Cable length
2.5 m
Note on materials
RoHS-compliant
Material of screws
Steel

Product condition

Related documents 572080 Specs