5242219 Festo Servo Motors
Part#:5242219
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-L-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-60-L-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242219 Festo price in the box on the right side or send a quick quote.
Product Details
- Rotor position sensor for manufacturer designation EQI 1131
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Electrical connection 1, connection technology M23x1
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Measuring flange 250 x 250 x 15 mm, steel
- Certificate issuing authority UL E342973
- Max. brake no-load speed 10000 1/min
- Storage lifetime, under nominal conditions 20000 h
- Max. brake friction work 5600 J
- DC brake response delay ≤ 2 ms
- Electrical connection 1, connection type Hybrid plug
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Balancing quality G 2.5
- Max. winding temperature 155 °C
- Brake coil inductivity 700 mH
- Brake current consumption 0.46 A
- Number of pole pairs 5
- Brake separation time ≤ 35 ms
- Winding longitudinal inductivity Ld (phase) 4.2 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Type code EMMT-AS
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Nominal operating voltage DC 565 V
- Contamination level 2
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Rotor position encoder for DC operating voltage 5 V
- Brake closing time 10 ms
- Cross inductivity Lq (phase) 5 mH
- Thermal resistance 1.2 K/W
- Thermal time constant 44 min
- Nominal rotary speed 3000 1/min
- Motor constants 0.44 Nm/A
- Phase-phase winding resistance 2.68 Ohm
- Rating class according to EN 60034-1 S1
- Storage temperature -20 °C ... 70 °C
- Brake holding torque 2.5 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Detent torque < 1.0% of peak torque
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. installation height 4000 m
- Brake stopping current 0.33 A
- Max. mechanical speed 16000 1/min
- Electric time constant 3 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position sensor measuring principle Inductive
- Max. rotational speed 11900 1/min
- Brake power consumption 11 W
- Motor nominal power 410 W
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Relative air humidity 0 - 90 %
- Total output inertia moment 0.49 kgcm²
- Thermal class according to EN 60034-1 F
- Stall torque 1.56 Nm
- Interface code, motor out 60P
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Electrical connection 1, number of pins/wires 15
- Brake airflow 0.33 A
- Brake coil resistance 52.4 Ohm
- Rotor position sensor Absolute encoder, multi-turn
- Brake DC operating voltage 24 V
- Rotor position sensor resolution 19 bit
- Type of winding switch Star inside
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Nominal torque 1.3 Nm
- Permissible radial shaft load 350 N
- Product weight 2230 g
- Standstill torque constant 0.52 Nm/A
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor interface EnDat® 22
- Continuous stall current 3.5 A
- Motor nominal current 3 A
- Peak current 18.3 A
- Degree of protection IP40
- Brake mass moment of inertia 0.074 kgcm²
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Conforms to standard IEC 60034
- Winding inductance phase-phase 7 mH
- Voltage constant, phase-to-phase 31.2 mVmin
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 5.6 Nm
- Permissible axial shaft load 70 N
- MTTFd, subcomponent 380 years, rotor position sensor
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5242219 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
