5242211 Festo Servo Motors
Part#:5242211
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-M-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-60-M-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242211 Festo price in the box on the right side or send a quick quote.
Product Details
- Thermal time constant 42 min
- Mounting position Any
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Measuring flange 250 x 250 x 15 mm, steel
- Rotor position encoder for absolutely detectable revolutions 4096
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation EQI 1131
- Balancing quality G 2.5
- Brake airflow 0.33 A
- Brake stopping current 0.33 A
- Brake closing time 10 ms
- DC brake response delay ≤ 2 ms
- Standstill torque constant 0.53 Nm/A
- Thermal resistance 1.3 K/W
- Type code EMMT-AS
- Nominal rotary speed 3000 1/min
- Motor constants 0.45 Nm/A
- Winding inductance phase-phase 11 mH
- Phase-phase winding resistance 4.85 Ohm
- Ambient temperature -15 °C ... 40 °C
- Brake mass moment of inertia 0.074 kgcm²
- Permissible axial shaft load 70 N
- Interface code, motor out 60P
- Electrical connection 1, connection type Hybrid plug
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Certificate issuing authority UL E342973
- Max. brake no-load speed 10000 1/min
- Brake coil inductivity 700 mH
- Number of pole pairs 5
- Storage lifetime, under nominal conditions 20000 h
- Cross inductivity Lq (phase) 8.2 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Max. rotational speed 11800 1/min
- Brake DC operating voltage 24 V
- Nominal operating voltage DC 565 V
- Peak current 11 A
- Relative air humidity 0 - 90 %
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 1.15 Nm
- Product weight 1850 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Brake current consumption 0.46 A
- Max. brake friction work 5600 J
- Electric time constant 2.7 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position sensor Absolute encoder, multi-turn
- Continuous stall current 2.5 A
- Rotor position sensor resolution 19 bit
- Storage temperature -20 °C ... 70 °C
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Peak torque 3.4 Nm
- Permissible radial shaft load 350 N
- Electrical connection for input 1, connection pattern 00995913
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. winding temperature 155 °C
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 52.4 Ohm
- Max. mechanical speed 16000 1/min
- Brake separation time ≤ 35 ms
- Winding longitudinal inductivity Ld (phase) 7 mH
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor interface EnDat® 22
- Rotor position sensor measuring principle Inductive
- Motor nominal power 310 W
- Type of winding switch Star inside
- Voltage constant, phase-to-phase 32 mVmin
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Total output inertia moment 0.373 kgcm²
- MTTF, subcomponent 190 years, rotor position sensor
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 11 W
- Motor nominal current 2.2 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Brake holding torque 2.5 Nm
- Nominal torque 1 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5242211 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
