3929540 Festo Positioners
Part#:3929540
Manufacturer:Festo
Alt. Part#:CMSX-P-SE-C-U-F1-D-130-C
Product Lifecycle:Active
Get a quick Quote!
About the product: positioner CMSX-P-SE-C-U-F1-D-130-C electropneumatic, for double-acting pneumatic quarter turn actuators, connection for external displacement/angle sensor, standard nominal flow rate 130 l/min, holding regulating action safety position, 4-wire, power sup
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929540 Festo price in the box on the right side or send a quick quote.
3929540 Product Details
- Shaft material High-alloy stainless steel
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Analog outputs, galvanic isolation no
- Digital outputs, reverse polarity protection yes
- Electrical connection 2, connection technology Screw terminal
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Max. current consumption 600 mA
- Electrical connection 2, conductor cross section < 1.5 mm²
- Operating pressure 3 bar ... 8 bar
- Size of dead space 0.5 % ... 10 %
- Material of screws High-alloy stainless steel
- Analog inputs, resolution 16 bit
- Approved cable diameter 7-13 mm for electrical connection 1 3-6.5 mm for electrical connection 2
- Display 7-segment With backlighting
- Mounting position Any
- Electrical connection 1, connection type Terminal strip
- Digital outputs, potential separation Yes, optocoupler
- Analog outputs, overload protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Digital inputs, electrical isolation Yes, optocoupler
- Contamination level 3
- Relative air humidity 93 %
- Mode of operation Double-acting
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Electrical connection 1, connection technology Screw terminal
- Max. cable length 3 m for electrical connection 2 30 m for electrical connection 1
- Analog outputs, short-circuit protection yes
- Electrical connection 1, function 2x digital input Load power supply
- Analog outputs, signal range 4 - 20 mA
- Digital outputs, overload protection yes
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Electrical connection 1, number of pins/wires 14
- Setting options Via display and pushbuttons
- Analog outputs, resolution 12 bit
- Analog inputs, galvanic isolation no
- Quick-coupling material High-alloy stainless steel
- Electrical connection 2, connection type Terminal strip
- Switching output 3 x PNP or 3 x NPN switchable
- Analog outputs, reverse polarity protection yes
- Analog inputs, linearity error at 25°C 0.5%
- Digital inputs, reverse polarity protection yes
- Base plate material Wrought aluminum alloy Anodized
- Electrical connection 2, number of pins/wires 2
- Electrical connection 1, conductor cross section < 1.5 mm²
- Type code CMSX
- Connection resistance ≤ 80 kOhm
- Certification RCM compliance mark
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Standard nominal flow rate 130 l/min
- Analog inputs, overload protection yes
- Digital outputs, output current 100 mA
- Switching input PNP NPN
- Electrical connection 2, function External path/angle sensor
- Digital outputs, short circuit current rating yes
- Inspection window material PC
- Analog outputs, linearity error at 25°C 0.5%
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Electrical connection 1, tightening torque 0.6 Nm
- Nominal operating voltage DC 24 V
- DC operating voltage range 21.6 V ... 26.4 V
- Ambient temperature -5 °C ... 60 °C
- Pneumatic connection G1/8
- Seals material NBR
- Design digital, electropneumatic positioner
- Input characteristics As per IEC 61131-2, type 3
- Analog outputs, max. load resistance ≤ 600 Ohm
- Electrical connection 2, tightening torque 0.6 Nm
- Reverse polarity protection for operating voltage connections
- Measuring principle of linear potentiometer Potentiometer
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Cable fitting M12 x 1.5 for electrical connection 2 M20 x 1.5 for electrical connection 1
- Product weight 970 g
- Material for cable connector PA
- Degree of protection IP65
- Note on materials RoHS-compliant
- Storage temperature -20 °C ... 60 °C
- Information on operating and pilot media Operation with oil lubrication not possible
- Type of mounting With accessories
- Housing material PC-reinforced
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 3929540 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
3929540
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
