S18UIAQ Banner Electronic Components

S18UIAQ Product Details

• Wireless
  No
• RS-485
  No
• 1-wire Serial Interface
  No
• RS-232
  No
• Common Ethernet Protocol
  No
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Barrel Diameter (mm)
  18
• Temp. Warm-up Drift (Notes 2)
  After 60 min, the apparent switchpoint is < 0.3% of the actual position.
• Profibus
  No
• RS-422
  No
• SSI
  No
• PROFINET
  No
• IO Link
  No
• Application: Ultrasonic
  Yes
• Feature: Chemical Resistant
  No
• Feature: Timing (Hold/Delay)
  No
• Feature: Clear Object Detection
  Yes
• Feature: Remote Teach
  Yes
• Power/Current Consumption (exclusive of load)
  65 mA max; 40 mA @ 25 V dc
• Ultrasonic Frequency (kHz)
  300
Remote Teach and Laser Control Input Impedence
12 kΩ
Minimum Window Size (mm)
5
Analog Linearity (mm)
+/- 0.5
Minimum Response Time (ms)
2.5
Rep Rate (ms)
2.5
Temp. Warm-up Drift (Notes 1)
After 30 min, the apparent switchpoint is < 0.5% of the actual position.
Temperature Warm-up Drift upon Power-up
Temp. compensation enabled, < 1.0% of the sensing distance upon power-up.
Warm-up Time (minutes)
10
Max Op. Relative Humidity Non-Condensing (%)
100
Min Operating Temperature (°C)
-20
Output Protection
Protected against short circuit conditions
Max Operating Temperature (°C)
60
Storage Temperature (°C)
-40 to 80
IP Rating
IP67
NEMA Rating
NEMA 6P
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Discrete (Switched) Outputs
Bipolar (NPN & PNP)
Temperature Effect (mm/°C)
0.02% of sensing distance/°C
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Number of Pins
5
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Delay at Power-up (ms)
300
Adjustments
Push Button; Remote Teach
Max Sensing Distance (mm)
300
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
30
Analog Resolution/Discrete Repeatability
1 at 2.5 ms response speed, 0.5 at 30 ms response speed
Quick Disconnect Type
M12 (Euro)
Analog Output Configuration
4-20 mA
Connection
Integral QD
Indicator
LED(s)
Input/Output
Analog
Primary Housing Material
ABS/Polycarbonate
Sensing Mode (Detailed)
Time of Flight
Max Measurement Range
>100 mm - <=500 mm
Power
DC
Housing Style
Barrel - Straight
Sensing Mode (General)
Proximity
PC Configurable
No
Device Type
Sensor
Sensing Beam
Ultrasonic
Supply voltage (DC)
10Vdc-30Vdc (12Vdc / 24Vdc nom.)
Sub-range name
S18U
Shape
Cylindrical threaded/barrel
Ambient air temperature for operation
-20...+60 °C
Product series / family name
U-GAGE series
Main function
Sensor (Distance)
Functions
Ultrasonic distance sensor (straight axis) green LED (power ON) yellow LED (output state) red LED (teach active) TEACH mode
Thread size
M18
Degree of protection
IP67 NEMA 6P
Primary brand
Banner Engineering
Design
time-of-flight system
Analog outputs
1 x analog output (4-20mA)
Order code / Manufacturer SKU
02703
Protection functions
Short-circuit
Emission frequency
300kHz
Compliant with standard(s)
cULus CCC CE
Connection type
Pre-equipped with 5-pin Euro-style M12 connector
Material
thermoplastic housing
Sensing distance
30...300mm

Product condition

Related documents S18UIAQ Specs