LTF12IC2LDQP Banner Optical Sensors
Part#:LTF12IC2LDQP
Manufacturer:Banner
Alt. Part#:94850
Product Lifecycle:Active
Get a quick Quote!
Laser Diffuse Time-of-Flight Sensor; Range: 50-12000 mm; Input: 12-30 V dc; Output: Analog: 4-20 mA; Class 2 Laser; Discrete: NPN/PNP Configurable; 150 mm (6 in) M12 Pigtail QD
About the manufacturer: Banner is one of the manufacturers that offers Optical Sensors that you can order at Quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.
Check out the LTF12IC2LDQP Banner price in the box on the right side or send a quick quote.
Product Details
- Weight408.2328 g
- Country Of OriginUS
- 1-wire Serial Interface No
- RS-485 No
- Profibus No
- Wireless No
- SSI No
- RS-422 No
- RS-232 No
- Feature: Health/ Marginal Signal Output Yes
- Common Ethernet Protocol No
- IO Link No
- Feature: Chemical Resistant No
- Max Ambient Light (Lux) 40000
- Feature: Remote Teach Yes
- Feature: Timing (Hold/Delay) Yes
- Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
- Typical Laser Lifetime (Hours) 60000
- Power/Current Consumption (exclusive of load) <85 mA @ 24 V (< 2.1 W)
- Laser Control Yes
- Minimum Window Size (mm) 10
- Alarm Output (mA) 100
- Discrete Output Hysteresis (mm) Automatically adjusted
- Analog Linearity (mm) +/- 10
- Spot Size (@ Reference Distance) 6.5 mm at 50 mm, 12.5 mm at 12000 mm
- Warm-up Time (minutes) 15
- Minimum Response Time (ms) 1.5
- Max Op. Relative Humidity Non-Condensing (%) 90 at 55°C
- Discrete (Switched) Outputs 1 NPN/PNP Configurable
- Max Operating Temperature (°C) 55
- Output Protection Protected against continuous overload and short circuit
- IP Rating IP67
- NEMA Rating NEMA 6
- Analog Current Output Rating 1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
- Min Operating Temperature (°C) -20
- Output Saturation Voltage NPN Outputs < 1.6V @ 100ma
- Output Saturation Voltage PNP Outputs < 3V @ 100ma
- Sensing Beam Wavelength (nm) 660
- Adjustments Push Button; Remote Teach
- Number of Pins 5
- PROFINET No
- Max Off-state Leakage Current (µA) PNP <10µA at 30V, NPN <200µa at 30V
- Window Material Acrylic
- Storage Temperature (°C) -30 to 65
- Max Discrete (Switched) Output (mA) 100
- Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Vibration MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Temperature Effect (mm/°C) 0.25mm/C (typical)
- Delay at Power-up (ms) 2000
- Power Supply 12-30 V dc
- Minimum Sensing Distance (mm) 50
- Max Sensing Distance (mm) 12000
- Analog Resolution/Discrete Repeatability 1
- Quick Disconnect Type M12 (Euro)
- Connection Pigtail QD
- Analog Output Configuration 4-20 mA
- Indicator Display; LED(s)
- Input/Output Analog & Discrete
- Laser Classification Class 2
- Primary Housing Material Zinc Alloy Die-Cast
- Device Type Sensor
- Housing Style Rectangular
- Sensing Mode (General) Proximity
- Cable Length (m) 0.15
- Sensing Mode (Detailed) Time of Flight
- Power DC
- PC Configurable No
- Max Measurement Range >1 m - <=20 m
- Sensing Beam Visible Red Laser
- Product series / family name L-GAGE series
- Sub-range name LTF
- Main function Sensor (Distance)
- Display LCD 2 lines x 8 characters
- Shape Rectangular
- Order code / Manufacturer SKU 94850
- Primary brand Banner Engineering
- Supply voltage (DC) 12Vdc-30Vdc (24Vdc nom.)
- Sensing distance 5cm...12m
- Digital outputs 1 x digital output (PNP/NPN transistor)
- Connection type Pre-wired with 6" / 150mm pigtail terminated with 5-pin Euro-style M12 connector
- Functions Class 2 Laser photo-electric distance sensor/transmitter green LED (power ON) yellow LED (analog output ON) yellow LED (discrete output ON) TEACH mode
- Wavelength 660 nm
- Material Die-cast Zinc alloy housing Acrylic window
- Compliant with standard(s) cULus CE
- Design diffuse time-of-flight system
- Degree of protection IP67 NEMA 6
- Light Color Visible class 2 red Laser
- Analog outputs 1 x analog output (4-20mA)
- Ambient air temperature for operation -20...+55 °C
- Protection functions Overload Short-circuit
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
LTF12IC2LDQP Description
Banner Engineering LTF12IC2LDQP is a Class 2 laser photo-electric distance sensor/transmitter from the LTF series, designed with a diffuse time-of-flight system and TEACH mode. It features a visible class 2 red laser with a wavelength of 660 nm. The sensor is housed in a rectangular, die-cast zinc alloy body with an acrylic window. It is pre-wired with a 6" / 150mm pigtail terminated with a 5-pin Euro-style M12 connector. This sensor operates on a supply voltage of 12Vdc-30Vdc (24Vdc nom.) and can function within an ambient air temperature range of -20...+55 °C. It offers overload and short-circuit protection, with a degree of protection rated at IP67 NEMA 6. The LTF12IC2LDQP provides 1 x analog output (4-20mA) and 1 x digital output (PNP/NPN transistor), capable of sensing distances from 5cm to 12m.
Related documents LTF12IC2LDQP Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Banner
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Banner Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Banner Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Banner, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
