LTF12IC2LD W/30 Banner Electronic Components
Part#:LTF12IC2LD W/30
Manufacturer:Banner
Product Lifecycle:Active
Get a quick Quote!
Banner Engineering LTF12IC2LD W/30 is a Class 2 laser photo-electric distance sensor/transmitter from the LTF series, designed with a diffuse time-of-flight system and TEACH mode. It features a visible class 2 red laser with a wavelength of 660 nm. The sensor is housed in a rectangular, die-cast zinc alloy casing with an acrylic window. It is pre-wired with a 30ft / 9m cable terminated with bare end flying leads for connection. This sensor operates within a supply voltage range of 12Vdc-30Vdc, with 24Vdc nominal. It offers a sensing distance of 5cm to 12m and includes both analog (1 x analog output 4-20mA) and digital outputs (1 x digital output PNP/NPN transistor). The LTF12IC2LD W/30 is equipped with protection functions against overload and short-circuit, ensuring its durability. It operates effectively in ambient air temperatures ranging from -20 to +55 °C and is rated with a degree of protection of IP67 NEMA 6, making it suitable for challenging environments.
About the manufacturer: Banner is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.
Check out the LTF12IC2LD W/30 Banner price in the box on the right side or send a quick quote.
Product Details
- Wireless No
- Common Ethernet Protocol No
- 1-wire Serial Interface No
- PROFINET No
- Feature: Health/ Marginal Signal Output Yes
- SSI No
- RS-485 No
- IO Link No
- Feature: Timing (Hold/Delay) Yes
- Power/Current Consumption (exclusive of load) <85 mA @ 24 V (< 2.1 W)
- Feature: Remote Teach Yes
- Typical Laser Lifetime (Hours) 60000
- Max Ambient Light (Lux) 40000
- Laser Control Yes
- Minimum Window Size (mm) 10
- Analog Linearity (mm) +/- 10
- Warm-up Time (minutes) 15
- Minimum Response Time (ms) 1.5
- Max Op. Relative Humidity Non-Condensing (%) 90 at 55°C
- Output Saturation Voltage PNP Outputs < 3V @ 100ma
- Vibration MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Profibus No
- RS-422 No
- RS-232 No
- Feature: Chemical Resistant No
- Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
- Max Off-state Leakage Current (µA) PNP <10µA at 30V, NPN <200µa at 30V
- Alarm Output (mA) 100
- Discrete Output Hysteresis (mm) Automatically adjusted
- Spot Size (@ Reference Distance) 6.5 mm at 50 mm, 12.5 mm at 12000 mm
- Min Operating Temperature (°C) -20
- Window Material Acrylic
- IP Rating IP67
- Max Operating Temperature (°C) 55
- Storage Temperature (°C) -30 to 65
- NEMA Rating NEMA 6
- Output Protection Protected against continuous overload and short circuit
- Discrete (Switched) Outputs 1 NPN/PNP Configurable
- Max Discrete (Switched) Output (mA) 100
- Analog Current Output Rating 1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
- Output Saturation Voltage NPN Outputs < 1.6V @ 100ma
- Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Delay at Power-up (ms) 2000
- Number of Pins 5
- Temperature Effect (mm/°C) 0.25mm/C (typical)
- Adjustments Push Button; Remote Teach
- Sensing Beam Wavelength (nm) 660
- Power Supply 12-30 V dc
- Max Sensing Distance (mm) 12000
- Minimum Sensing Distance (mm) 50
- Analog Output Configuration 4-20 mA
- Connection Flying Leads
- Device Type Sensor
- Analog Resolution/Discrete Repeatability 1
- Indicator Display; LED(s)
- Quick Disconnect Type No QD
- Input/Output Analog & Discrete
- Housing Style Rectangular
- Sensing Mode (Detailed) Time of Flight
- Laser Classification Class 2
- Primary Housing Material Zinc Alloy Die-Cast
- PC Configurable No
- Power DC
- Sensing Mode (General) Proximity
- Cable Length (m) 9
- Max Measurement Range >1 m - <=20 m
- Sensing Beam Visible Red Laser
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents LTF12IC2LD W/30 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Banner
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Banner Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Banner Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Banner, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
