LT3PILV Banner Electronic Components

LT3PILV Product Details

• Profibus
  No
• 1-wire Serial Interface
  No
• Wireless
  No
• SSI
  No
• RS-485
  No
• RS-232
  No
• RS-422
  No
• Common Ethernet Protocol
  No
• Feature: Timing (Hold/Delay)
  No
• Feature: Chemical Resistant
  No
• Feature: Remote Teach
  Yes
• Typical Laser Lifetime (Hours)
  75000
• PROFINET
  No
• IO Link
  No
• Max Off-state Leakage Current (µA)
  5
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Power/Current Consumption (exclusive of load)
  108 mA max @ 24 V dc
• Max Ambient Light (Lux)
  5000
• Laser Control
  Yes
• Minimum Window Size (mm)
  40
Discrete Output Hysteresis (mm)
6
Remote Teach and Laser Control Input Impedence
18 kΩ min. (65 kΩ min at 5 V dc)
Analog Linearity (mm)
+/- 60 mm from 0.5 to 50 m
Minimum Response Time (ms)
1
Spot Size (@ Reference Distance)
6 mm
Window Material
Acrylic
Warm-up Time (minutes)
30
Max Op. Relative Humidity Non-Condensing (%)
90 at 50°C
IP Rating
IP67
Max Operating Temperature (°C)
50
Discrete (Switched) Outputs
1 PNP
NEMA Rating
NEMA 6
Output Protection
Protected against short circuit conditions
Max Discrete (Switched) Output (mA)
100
Analog Current Output Rating
1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
Delay at Power-up (ms)
1000
Output Saturation Voltage PNP Outputs
< 1.2 V at 10 mA; < 1.6 V at 100 mA
Number of Pins
8
Sensing Beam Wavelength (nm)
658
Adjustments
Push Button; Remote Teach
Temperature Effect (mm/°C)
3 mm/°C
Power Supply
12-24 V dc
Minimum Sensing Distance (mm)
500
Indicator
LED(s)
Analog Output Configuration
4-20 mA
Quick Disconnect Type
No QD
Max Sensing Distance (mm)
50000
Analog Resolution/Discrete Repeatability
5 to 6 at slow response speed
Connection
Flying Leads
Primary Housing Material
ABS
Laser Classification
Class 1
Input/Output
Analog & Discrete
Device Type
Sensor
Housing Style
Rectangular
Sensing Mode (General)
Retroreflective
Sensing Mode (Detailed)
Time of Flight
Cable Length (m)
2
PC Configurable
No
Power
DC
Max Measurement Range
>20 m
Sensing Beam
Visible Red Laser
Supply voltage (DC)
12Vdc-24Vdc
Wavelength
658 nm
Light Color
Visible red
Sub-range name
LT3
Design
retro-reflective time-of-flight system
Shape
Rectangular
Ambient air temperature for operation
+50 °C
Digital outputs
1 x digital output (PNP transistor)
Primary brand
Banner Engineering
Functions
Class 1 Laser photo-electric distance sensor/transmitter green LED (power ON) yellow LED (output state) TEACH mode
Degree of protection
IP67 NEMA 6
Main function
Sensor (Distance)
Product series / family name
L-GAGE series
Connection type
Pre-wired with 6.5ft / 2m cable terminated with bare end flying leads
Analog outputs
1 x analog output (4-20mA)
Sensing distance
50cm...50m
Material
ABS housing Acrylic window
Protection functions
Short-circuit
Order code / Manufacturer SKU
67279

Product condition

Related documents LT3PILV Specs