LE250D W/30 Banner Electronic Components

LE250D W/30 Product Details

• 1-wire Serial Interface
  No
• Profibus
  No
• Wireless
  No
• RS-422
  No
• PROFINET
  No
• IO Link
  No
• Feature: Chemical Resistant
  No
• Common Ethernet Protocol
  No
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• SSI
  No
• RS-232
  No
• RS-485
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Remote Teach
  Yes
• Power/Current Consumption (exclusive of load)
  70 mA @ 24 V dc
• Feature: Timing (Hold/Delay)
  Yes
• Alarm Output (mA)
  100
• Max Ambient Light (Lux)
  10000
• Laser Control
  Yes
• Remote Teach and Laser Control Input Impedence
  18 kΩ min. (65 kΩ min at 5 V dc)
Minimum Window Size (mm)
1
Spot Size (@ Reference Distance)
0.9 mm x 1.2 mm @ 400 mm
Discrete Output Hysteresis (mm)
Automatically adjusted
Max Off-state Leakage Current (µA)
NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
Minimum Response Time (ms)
2
Warm-up Time (minutes)
10
Min Operating Temperature (°C)
-20
Max Operating Temperature (°C)
55
Storage Temperature (°C)
-30 to 65
Window Material
Acrylic
IP Rating
IP67
NEMA Rating
NEMA 6
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
2 NPN/PNP Configurable
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Max Discrete (Switched) Output (mA)
100
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Output Saturation Voltage PNP Outputs
< 3 V at 100 mA
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage NPN Outputs
< 1.6 V at 100 mA
Number of Pins
5
Sensing Beam Wavelength (nm)
650
Temperature Effect (mm/°C)
+/- 0.03 mm/°C from 100 to 250 mm, +/- 0.15 mm /°C at 1000 mm
Adjustments
Push Button; Remote Teach
Delay at Power-up (ms)
1000
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
100
Max Sensing Distance (mm)
400
Analog Resolution/Discrete Repeatability
100 mm to 250 mm: < 0.02; 250 mm to 400 mm: < 0.2
Primary Housing Material
Zinc Alloy Die-Cast
Quick Disconnect Type
No QD
Connection
Flying Leads
Laser Classification
Class 2
Indicator
LCD; LED(s)
Input/Output
Discrete
Power
DC
Sensing Mode (Detailed)
Triangulation
Max Measurement Range
>100 mm - <=500 mm
Cable Length (m)
9
PC Configurable
No
Sensing Mode (General)
Proximity
Housing Style
Rectangular
Sensing Beam
Visible Red Laser
Device Type
Sensor

Product condition

Related documents LE250D W/30 Specs