Name: DXM1200-EK9-A
Brand: Banner

DXM150-S1R2

Banner Engineering DXM150-S1R2 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The dimensions of this part are H93.9mm x W156mm x D94.6mm. It is equipped with 2 analog outputs (4-20mA / 0-10Vdc), 2 digital outputs (SPDT / Form-C / NO/NC contact type; 16A / 250Vac), and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A). Additionally, it has 2 digital inputs (12-30Vdc isolated inputs) and 8 digital inputs (12Vdc-30Vdc; Sink/Source/Counter) which can also be used as 8AI (4-20mA / 0-10Vdc / 10kΩ thermistor). This controller utilizes FHSS (Frequency Hopping Spread Spectrum) technology for its design, supports RS-485 Modbus RTU communication protocol, and connects via an RP-SMA connector. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). The DXM150-S1R2 features a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America) for transmission, capable of reaching a maximum distance of 9.6km at nominal emission power. It has an on-board memory capacity of 2MB and supports an SD card up to 8GB.

Banner

This item can ship within 24h!

SI-RFA-DM1

$388.62

Verified stock: 8

Banner Engineering SI-RFA-DM1 is a mounting accessory featuring a diagnostic circuit with USB 2.0 compatibility. It functions as an IO-Link diagnostic module and is equipped with 8 digital outputs. This part is designed with a degree of protection rated at IP69, indicating a high level of protection against ingress of dust and water.

Banner

CFP-KIT-9

Verified stock: 0

Banner Engineering CFP-KIT-9 is a remote I/O controller designed for DIN rail mounting. It operates on a transmission frequency of 900 MHz, specifically within the 900MHz ISM band at a power of 1W. This kit falls under the Wireless Call for Parts sub-range and is part of the DXM series, featuring a wireless controller, a wireless direct select operator interface node, and a wireless touch button node. It requires a supply voltage of 24Vdc to function.

Banner

DXM1000-B1R4

Verified stock: 0

Banner Engineering DXM1000-B1R4 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The device dimensions are H59.5mm x W104mm x D94.6mm. It is equipped with 2 analog outputs (0-20mA / 0-10Vdc), 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), and 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also be used as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This Modbus I/O controller operates with a 300MHz processing speed, utilizing Frequency Hopping Spread Spectrum (FHSS) technology and an M7 processor for efficient data aggregation of sensor and wireless networks. It includes a CAN bus, RJ45 connector for Ethernet, and an RP-SMA connector. The supply voltage requirement is 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols supported are RS-485, RS-232, Modbus RTU, Modbus TCP, Ethernet/IP, and PROFINET. The device has a memory capacity of 16MB (on-board) and supports an 8GB SD card. It operates on a 2.4GHz ISM band with a 65mW radio (HE5 MultiHop data radio; worldwide), capable of a maximum transmission distance of 3.2km at nominal emission power.

Banner

DX81

Verified stock: 0

DX81 flex pwr battery supply

Banner

DX81H

Verified stock: 0

Surecross DX81 Flexpower Supply Module

Banner

This item can ship within 24h!

DXM100-S1R2

$610.98

Verified stock: 2

Banner Engineering DXM100-S1R2 is a Remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers 2 analog outputs (4-20mA / 0-10Vdc), ensuring compatibility with various sensors and actuators. The device is protected by an IP20 degree of protection and has dimensions of H61.1mm x W105.3mm x D94.7mm. It includes 4 digital outputs (12Vdc-30Vdc; NMOS; 1A) and 4 digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). The DXM100-S1R2 utilizes FHSS (Frequency Hopping Spread Spectrum) technology for secure communication and features an RP-SMA connector for connectivity. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.) and supports RS-485 Modbus RTU communication protocol. With an 8GB memory capacity via an SD card and a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America), it achieves a maximum transmission distance of 9.6km at nominal emission power.

Banner

DXM150-B2R2

Verified stock: 0

Banner Engineering DXM150-B2R2 is a remote I/O controller designed for DIN rail mounting with a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. This controller features 2 analog outputs (0-20mA / 0-10Vdc), 8 digital outputs (12Vdc-30Vdc; PNP/NPN; 100mA), and 10 digital inputs, which include 2 isolated inputs (12-30Vdc) and 8 inputs (12Vdc-30Vdc; Sink/Source/Counter) that can also function as 8 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). It utilizes a 900 MHz transmission frequency with a maximum transmission distance of 9.6km at nominal emission power. The DXM150-B2R2 is equipped with a 100MHz processor, supports Frequency Hopping Spread Spectrum (FHSS) technology, and is powered by a SAM4 processor. Connections are facilitated through an RJ45 connector for Ethernet and an RP-SMA connector, supporting a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols include RS-485 Modbus RTU, Modbus TCP, and Ethernet/IP. It has a memory capacity of 2MB on-board and supports an 8GB SD card. The device's dimensions are H93.9mm x W156mm x D94.6mm.

Banner

DXM150-S1R2

Verified stock: 0

Banner Engineering DXM150-S1R2 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The dimensions of this part are H93.9mm x W156mm x D94.6mm. It is equipped with 2 analog outputs (4-20mA / 0-10Vdc), 2 digital outputs (SPDT / Form-C / NO/NC contact type; 16A / 250Vac), and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A). Additionally, it has 2 digital inputs (12-30Vdc isolated inputs) and 8 digital inputs (12Vdc-30Vdc; Sink/Source/Counter) which can also be used as 8AI (4-20mA / 0-10Vdc / 10kΩ thermistor). This controller utilizes FHSS (Frequency Hopping Spread Spectrum) technology for its design, supports RS-485 Modbus RTU communication protocol, and connects via an RP-SMA connector. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). The DXM150-S1R2 features a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America) for transmission, capable of reaching a maximum distance of 9.6km at nominal emission power. It has an on-board memory capacity of 2MB and supports an SD card up to 8GB.

Banner

This item can ship within 24h!

SI-RFA-DM1

$388.62

Verified stock: 8

Banner Engineering SI-RFA-DM1 is a mounting accessory featuring a diagnostic circuit with USB 2.0 compatibility. It functions as an IO-Link diagnostic module and is equipped with 8 digital outputs. This part is designed with a degree of protection rated at IP69, indicating a high level of protection against ingress of dust and water.

Banner

CFP-KIT-9

Verified stock: 0

Banner Engineering CFP-KIT-9 is a remote I/O controller designed for DIN rail mounting. It operates on a transmission frequency of 900 MHz, specifically within the 900MHz ISM band at a power of 1W. This kit falls under the Wireless Call for Parts sub-range and is part of the DXM series, featuring a wireless controller, a wireless direct select operator interface node, and a wireless touch button node. It requires a supply voltage of 24Vdc to function.

Banner

DXM1000-B1R4

Verified stock: 0

Banner Engineering DXM1000-B1R4 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The device dimensions are H59.5mm x W104mm x D94.6mm. It is equipped with 2 analog outputs (0-20mA / 0-10Vdc), 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), and 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also be used as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This Modbus I/O controller operates with a 300MHz processing speed, utilizing Frequency Hopping Spread Spectrum (FHSS) technology and an M7 processor for efficient data aggregation of sensor and wireless networks. It includes a CAN bus, RJ45 connector for Ethernet, and an RP-SMA connector. The supply voltage requirement is 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols supported are RS-485, RS-232, Modbus RTU, Modbus TCP, Ethernet/IP, and PROFINET. The device has a memory capacity of 16MB (on-board) and supports an 8GB SD card. It operates on a 2.4GHz ISM band with a 65mW radio (HE5 MultiHop data radio; worldwide), capable of a maximum transmission distance of 3.2km at nominal emission power.

Banner

DX81

Verified stock: 0

DX81 flex pwr battery supply

Banner

DX81H

Verified stock: 0

Surecross DX81 Flexpower Supply Module

Banner

This item can ship within 24h!

DXM100-S1R2

$610.98

Verified stock: 2

Banner Engineering DXM100-S1R2 is a Remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers 2 analog outputs (4-20mA / 0-10Vdc), ensuring compatibility with various sensors and actuators. The device is protected by an IP20 degree of protection and has dimensions of H61.1mm x W105.3mm x D94.7mm. It includes 4 digital outputs (12Vdc-30Vdc; NMOS; 1A) and 4 digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). The DXM100-S1R2 utilizes FHSS (Frequency Hopping Spread Spectrum) technology for secure communication and features an RP-SMA connector for connectivity. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.) and supports RS-485 Modbus RTU communication protocol. With an 8GB memory capacity via an SD card and a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America), it achieves a maximum transmission distance of 9.6km at nominal emission power.

Banner

DXM150-B2R2

Verified stock: 0

Banner Engineering DXM150-B2R2 is a remote I/O controller designed for DIN rail mounting with a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. This controller features 2 analog outputs (0-20mA / 0-10Vdc), 8 digital outputs (12Vdc-30Vdc; PNP/NPN; 100mA), and 10 digital inputs, which include 2 isolated inputs (12-30Vdc) and 8 inputs (12Vdc-30Vdc; Sink/Source/Counter) that can also function as 8 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). It utilizes a 900 MHz transmission frequency with a maximum transmission distance of 9.6km at nominal emission power. The DXM150-B2R2 is equipped with a 100MHz processor, supports Frequency Hopping Spread Spectrum (FHSS) technology, and is powered by a SAM4 processor. Connections are facilitated through an RJ45 connector for Ethernet and an RP-SMA connector, supporting a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols include RS-485 Modbus RTU, Modbus TCP, and Ethernet/IP. It has a memory capacity of 2MB on-board and supports an 8GB SD card. The device's dimensions are H93.9mm x W156mm x D94.6mm.

Banner

DXM150-S1R2

Verified stock: 0

Banner Engineering DXM150-S1R2 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The dimensions of this part are H93.9mm x W156mm x D94.6mm. It is equipped with 2 analog outputs (4-20mA / 0-10Vdc), 2 digital outputs (SPDT / Form-C / NO/NC contact type; 16A / 250Vac), and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A). Additionally, it has 2 digital inputs (12-30Vdc isolated inputs) and 8 digital inputs (12Vdc-30Vdc; Sink/Source/Counter) which can also be used as 8AI (4-20mA / 0-10Vdc / 10kΩ thermistor). This controller utilizes FHSS (Frequency Hopping Spread Spectrum) technology for its design, supports RS-485 Modbus RTU communication protocol, and connects via an RP-SMA connector. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). The DXM150-S1R2 features a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America) for transmission, capable of reaching a maximum distance of 9.6km at nominal emission power. It has an on-board memory capacity of 2MB and supports an SD card up to 8GB.

Banner

This item can ship within 24h!

SI-RFA-DM1

$388.62

Verified stock: 8

Banner Engineering SI-RFA-DM1 is a mounting accessory featuring a diagnostic circuit with USB 2.0 compatibility. It functions as an IO-Link diagnostic module and is equipped with 8 digital outputs. This part is designed with a degree of protection rated at IP69, indicating a high level of protection against ingress of dust and water.

Banner

CFP-KIT-9

Verified stock: 0

Banner Engineering CFP-KIT-9 is a remote I/O controller designed for DIN rail mounting. It operates on a transmission frequency of 900 MHz, specifically within the 900MHz ISM band at a power of 1W. This kit falls under the Wireless Call for Parts sub-range and is part of the DXM series, featuring a wireless controller, a wireless direct select operator interface node, and a wireless touch button node. It requires a supply voltage of 24Vdc to function.

Banner

DXM1000-B1R4

Verified stock: 0

Banner Engineering DXM1000-B1R4 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The device dimensions are H59.5mm x W104mm x D94.6mm. It is equipped with 2 analog outputs (0-20mA / 0-10Vdc), 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), and 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also be used as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This Modbus I/O controller operates with a 300MHz processing speed, utilizing Frequency Hopping Spread Spectrum (FHSS) technology and an M7 processor for efficient data aggregation of sensor and wireless networks. It includes a CAN bus, RJ45 connector for Ethernet, and an RP-SMA connector. The supply voltage requirement is 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols supported are RS-485, RS-232, Modbus RTU, Modbus TCP, Ethernet/IP, and PROFINET. The device has a memory capacity of 16MB (on-board) and supports an 8GB SD card. It operates on a 2.4GHz ISM band with a 65mW radio (HE5 MultiHop data radio; worldwide), capable of a maximum transmission distance of 3.2km at nominal emission power.

Banner

DXM1200-EK9-A Banner Electronic Components

Part#:DXM1200-EK9-A

Manufacturer:Banner

Product Details

Product condition

Related documents DXM1200-EK9-A Specs

Banner Disclaimer:

Relevant products

DXM150-S1R2

SI-RFA-DM1

CFP-KIT-9

DXM1000-B1R4

DX81

DX81H

DXM100-S1R2

DXM150-B2R2

DXM150-S1R2

SI-RFA-DM1

CFP-KIT-9

DXM1000-B1R4

DX81

DX81H

DXM100-S1R2

DXM150-B2R2

DXM150-S1R2

SI-RFA-DM1

CFP-KIT-9

DXM1000-B1R4

We are a proud member of: