DXM1000-B1R4 Banner Electronic Components

Name: DXM1000-B1R4
Brand: Banner

Banner DXM1000-B1R4 Banner Engineering DXM1000-B1R4 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The device dimensions are H59.5mm x W104mm x D94.6mm. It is equipped with 2 analog outputs (0-20mA / 0-10Vdc), 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), and 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also be used as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This Modbus I/O controller operates with a 300MHz processing speed, utilizing Frequency Hopping Spread Spectrum (FHSS) technology and an M7 processor for efficient data aggregation of sensor and wireless networks. It includes a CAN bus, RJ45 connector for Ethernet, and an RP-SMA connector. The supply voltage requirement is 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols supported are RS-485, RS-232, Modbus RTU, Modbus TCP, Ethernet/IP, and PROFINET. The device has a memory capacity of 16MB (on-board) and supports an 8GB SD card. It operates on a 2.4GHz ISM band with a 65mW radio (HE5 MultiHop data radio; worldwide), capable of a maximum transmission distance of 3.2km at nominal emission power.

Part#:DXM1000-B1R4

Manufacturer:Banner

Product Lifecycle:Active

Get a quick Quote!

Banner Engineering DXM1000-B1R4 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The device dimensions are H59.5mm x W104mm x D94.6mm. It is equipped with 2 analog outputs (0-20mA / 0-10Vdc), 4 digital outputs (12Vdc-30Vdc; NMOS; 1A), and 4 digital inputs (12-30Vdc; Sink/Source/Counter) which can also be used as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). This Modbus I/O controller operates with a 300MHz processing speed, utilizing Frequency Hopping Spread Spectrum (FHSS) technology and an M7 processor for efficient data aggregation of sensor and wireless networks. It includes a CAN bus, RJ45 connector for Ethernet, and an RP-SMA connector. The supply voltage requirement is 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols supported are RS-485, RS-232, Modbus RTU, Modbus TCP, Ethernet/IP, and PROFINET. The device has a memory capacity of 16MB (on-board) and supports an 8GB SD card. It operates on a 2.4GHz ISM band with a 65mW radio (HE5 MultiHop data radio; worldwide), capable of a maximum transmission distance of 3.2km at nominal emission power.

About the manufacturer: Banner is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the DXM1000-B1R4 Banner price in the box on the right side or send a quick quote.

Product Details

1-wire Serial Interface
No
Wireless
Yes
Wireless Radio Frequency
2.4 GHz
RS-485
Yes
RS-232
Yes
PROFINET
Yes
Modbus/TCP
Yes
Modbus RTU
Yes
EtherNet/IP
Yes
Feature: Hazardous Area
No
Dimension Length (mm)
100
On-Board Memory (MB)
16
Processing Speed (MHz)
300
Application: Indicator Light
Yes
Point-to-Multipoint Topology
Yes
Tree Topology
Yes
Point-to-Point Topology
Yes
Star Topology
Yes
LCD Display
Yes
Relative Humidity
95%

Min Temp Operating Conditions

-20

Max Temp Operating Conditions

Environmental Rating (IP)

IP20

Power Supply

12-30 V dc

Input Details

4 Universal Inputs

Output Details

4 NMOS Discrete, 2 Selectable Analog

Discrete Outputs

Yes

Discrete Inputs

Yes

Device Type

Wireless Controller with MultiHop Radio

Analog Outputs

Yes

Analog Inputs

Yes

Input/Output

Analog & Discrete

Power

Housing Style

External Terminals

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Relevant products

DXM150-S1R2

Verified stock: 0

Banner Engineering DXM150-S1R2 is a remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. The dimensions of this part are H93.9mm x W156mm x D94.6mm. It is equipped with 2 analog outputs (4-20mA / 0-10Vdc), 2 digital outputs (SPDT / Form-C / NO/NC contact type; 16A / 250Vac), and 4 digital outputs (12Vdc-30Vdc; NMOS; 1A). Additionally, it has 2 digital inputs (12-30Vdc isolated inputs) and 8 digital inputs (12Vdc-30Vdc; Sink/Source/Counter) which can also be used as 8AI (4-20mA / 0-10Vdc / 10kΩ thermistor). This controller utilizes FHSS (Frequency Hopping Spread Spectrum) technology for its design, supports RS-485 Modbus RTU communication protocol, and connects via an RP-SMA connector. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). The DXM150-S1R2 features a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America) for transmission, capable of reaching a maximum distance of 9.6km at nominal emission power. It has an on-board memory capacity of 2MB and supports an SD card up to 8GB.

Banner

This item can ship within 24h!

SI-RFA-DM1

$388.62

Verified stock: 8

Banner Engineering SI-RFA-DM1 is a mounting accessory featuring a diagnostic circuit with USB 2.0 compatibility. It functions as an IO-Link diagnostic module and is equipped with 8 digital outputs. This part is designed with a degree of protection rated at IP69, indicating a high level of protection against ingress of dust and water.

Banner

CFP-KIT-9

Verified stock: 0

Banner Engineering CFP-KIT-9 is a remote I/O controller designed for DIN rail mounting. It operates on a transmission frequency of 900 MHz, specifically within the 900MHz ISM band at a power of 1W. This kit falls under the Wireless Call for Parts sub-range and is part of the DXM series, featuring a wireless controller, a wireless direct select operator interface node, and a wireless touch button node. It requires a supply voltage of 24Vdc to function.

Banner

DX81

Verified stock: 0

DX81 flex pwr battery supply

Banner

DX81H

Verified stock: 0

Surecross DX81 Flexpower Supply Module

Banner

This item can ship within 24h!

DXM100-S1R2

$610.98

Verified stock: 2

Banner Engineering DXM100-S1R2 is a Remote I/O controller designed for DIN rail mounting and features a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers 2 analog outputs (4-20mA / 0-10Vdc), ensuring compatibility with various sensors and actuators. The device is protected by an IP20 degree of protection and has dimensions of H61.1mm x W105.3mm x D94.7mm. It includes 4 digital outputs (12Vdc-30Vdc; NMOS; 1A) and 4 digital inputs (12-30Vdc; Sink/Source/Counter) that can also function as 4 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). The DXM100-S1R2 utilizes FHSS (Frequency Hopping Spread Spectrum) technology for secure communication and features an RP-SMA connector for connectivity. It requires a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.) and supports RS-485 Modbus RTU communication protocol. With an 8GB memory capacity via an SD card and a 900MHz ISM band 1W radio (HE5 MultiHop data radio; North America), it achieves a maximum transmission distance of 9.6km at nominal emission power.

Banner

DXM150-B2R2

Verified stock: 0

Banner Engineering DXM150-B2R2 is a remote I/O controller designed for DIN rail mounting with a polycarbonate housing. It operates within an ambient air temperature range of -20 to +60°C and offers a degree of protection rated at IP20. This controller features 2 analog outputs (0-20mA / 0-10Vdc), 8 digital outputs (12Vdc-30Vdc; PNP/NPN; 100mA), and 10 digital inputs, which include 2 isolated inputs (12-30Vdc) and 8 inputs (12Vdc-30Vdc; Sink/Source/Counter) that can also function as 8 analog inputs (4-20mA / 0-10Vdc / 10kΩ thermistor). It utilizes a 900 MHz transmission frequency with a maximum transmission distance of 9.6km at nominal emission power. The DXM150-B2R2 is equipped with a 100MHz processor, supports Frequency Hopping Spread Spectrum (FHSS) technology, and is powered by a SAM4 processor. Connections are facilitated through an RJ45 connector for Ethernet and an RP-SMA connector, supporting a supply voltage of 12-30Vdc (12Vdc-24Vdc nom.). Communication protocols include RS-485 Modbus RTU, Modbus TCP, and Ethernet/IP. It has a memory capacity of 2MB on-board and supports an 8GB SD card. The device's dimensions are H93.9mm x W156mm x D94.6mm.

Banner