X20PS9402 B&R Electronic Components

X20PS9402 Product Details

• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Storage
  -40 to 85°C
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Transport
  -40 to 85°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Temperature Derating
  See section "Derating".
• Certifications EAC
  Yes
• Mounting orientation Vertical
  Yes
• Nominal output power Vertical mounting orientation
  7 W at 40°C and 5 W at 50°C
• Mounting orientation Horizontal
  Yes
• Nominal output power Horizontal mounting orientation
  7 W at 45°C and 5 W at 55°C
• Certifications KR
  Yes
• Certifications KC
  Yes
• Certifications ABS
  Yes
• Certifications LR
  ENV1
• Certifications DNV
  Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications UL
cULus E115267; Industrial control equipment
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications CE
Yes
Diagnostics Overload
Yes, using LED status indicator and software
Diagnostics Module run/error
Yes, using LED status indicator and software
Certifications UKCA
Yes
Power consumption Internal I/O
0.6 W
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus base X20BB8x separately.
Pitch
12.5+0.2 mm
Behavior on short circuit
Required line fuse
Degree of protection per EN 60529
IP20
Electrical isolation
BC/X2X Link supply not isolated from BC/X2X Link power supply, and I/O supply not isolated from I/O power supply
Permissible contact load
10 A
Nominal output voltage
24 VDC
Overload characteristics
Short-circuit proof, temporary overload
Redundant operation
No
Fuse
Integrated, cannot be replaced
Input current
Max. 0.7 A
Input voltage
24 VDC -15% / +20%
Reverse polarity protection
Yes
Power consumption for X2X Link power supply
1.64 W
Status indicators
Operating state, module status
B&R ID code
0xA389
Power supply module
24 VDC supply module for bus controller, X2X Link power supply and I/O
Parallel connection
No

Product condition

Related documents X20PS9402 Specs