X20DO9322 B&R Electronic Components

X20DO9322 Product Details

• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Derating
  See section "Derating".
• Temperature Transport
  -40 to 85°C
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Storage
  -40 to 85°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Mounting orientation Vertical
  Yes
• Mounting orientation Horizontal
  Yes
• Switching frequency Inductive load
  See section "Switching inductive loads".
• Switching delay 1 → 0
  <300 µs
• Switching frequency Resistive load
  Max. 500 Hz
• Switching delay 0 → 1
  <300 µs
• Certifications KC
  Yes
• Certifications EAC
  Yes
• Certifications ABS
  Yes
• Certifications KR
  Yes
Certifications LR
ENV1
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications CE
Yes
Power consumption Internal I/O
1.15 W
Certifications UL
cULus E115267; Industrial control equipment
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications UKCA
Yes
Diagnostics Module run/error
Yes, using LED status indicator and software
Power consumption Bus
0.26 W
Diagnostics Outputs
Yes, using LED status indicator and software (output error status)
Pitch
12.5+0.2 mm
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Degree of protection per EN 60529
IP20
Insulation voltage between channel and bus
500 Veff
Braking voltage when switching off inductive loads
Typ. 50 VDC
Electrical isolation
Channel isolated from bus; Channel not isolated from channel and I/O power supply
Switch-on in the event of overload shutdown or short-circuit shutdown
Approx. 10 ms (depends on the module temperature)
RDS(on)
210 mΩ
Leakage current when the output is switched off
5 µA
Peak short-circuit current
<12 A
Output protection
Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current"); Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads")
Diagnostic status
Output monitoring with 10 ms delay
Output circuit
Source
Connection type
1-wire connections
B&R ID code
0x1B9A
Nominal voltage
24 VDC
Total nominal current
6 A
Variant
Current-sourcing FET
I/O module
12 digital outputs 24 VDC for 1-wire connections
Status indicators
I/O function per channel, operating state, module status
Additional power dissipation caused by actuators (resistive) [W]
+0.63
Nominal output current
0.5 A
Switching voltage
24 VDC -15% / +20%

Product condition

Related documents X20DO9322 Specs