X20DC2398 B&R Electronic Components

Product Details

• Relative humidity Transport
  5 to 95%, non-condensing
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Mounting orientation Horizontal
  Yes
• Relative humidity Operation
  5 to 95%, non-condensing
• Mounting orientation Vertical
  Yes
• Relative humidity Storage
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Temperature Derating
  -
• Temperature Storage
  -40 to 85°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Input filter Hardware
  ≤2 µs
• Switching threshold High
  >15 VDC
• Switching threshold Low
  <5 VDC
• Input filter Software
  -
• Power consumption Internal I/O
  1.4 W
• Certifications EAC
  Yes
• Certifications KC
  Yes
• Certifications CE
  Yes
CLK: Output current
Max. 100 mA
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications ABS
Yes
Power consumption Bus
0.01 W
Diagnostics Module run/error
Yes, using LED status indicator and software
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications KR
Yes
Certifications LR
ENV1
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Pitch
12.5+0.2 mm
Certifications UKCA
Yes
Certifications UL
cULus E115267; Industrial control equipment
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Degree of protection per EN 60529
IP20
Overload characteristics of encoder power supply
Short-circuit proof, overload-proof
Insulation voltage between encoder and bus
500 Veff
Electrical isolation
Bus isolated from encoder and channel; Channel not isolated from channel and encoder; Encoder not isolated from encoder
DATA: Input resistance
18.4 kΩ
Coding
Gray/Binary
Encoder power supply
Module-internal, max. 600 mA
Max. transfer rate
125 kbit/s
Connection type
3-wire connections
Counter size
32-bit
Input resistance
7.19 kΩ
Encoder inputs
24 V, asymmetrical
Insulation voltage between channel and bus
500 Veff
Input circuit
Sink
Type of signal lines
Shielded lines must be used for all signal lines.
Input characteristics per EN 61131-2
Type 1
Nominal voltage
24 VDC
Input current at 24 VDC
Approx. 3.3 mA
B&R ID code
0x1BAD
I/O module
2 SSI absolute encoder 24 V
Status indicators
I/O function per channel, operating state, module status
Quantity
2
Input voltage
24 VDC -15% / +20%

Related documents X20DC2398 Specs