890-234 WAGO Electrical Connector Accessories

WAGO 890-234 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 16A. It is designed for overvoltage category III and pollution degree 3 environments. For the US market, certain versions can be used for current interruption in specific applications below 5A and up to 600V, as per UL 1977, which rates it for 600V and 12A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It offers 4 connection points, with the same number of total potentials and includes a preceding PE contact. The connection technology is Push-in CAGE CLAMP, with various conductor compatibility and a strip length of 9mm. The pole number is 4, with a conductor entry direction to mating direction of 0°. Physically, it has a pin spacing of 4.4mm, dimensions of 19.2mm in width, 11.7mm in height, and 34.1mm in depth. It is suitable for general mains applications, features variable coding, and is marked for potential identification. The mating force varies between 20 to 70N, with a locked retention force greater than 80N, and an unmating force similar to the mating force. It supports up to 200 mating cycles without resistive load and offers IP20 protection, IP40 when mated with strain relief housing. The male connector/plug type ensures mismating protection and includes a retrofitting locking lever. The part is white with a gray cover, made from Polyamide (PA66) in the insulation, and has a V0 flammability class per UL94. The contact material is a surface-treated copper or copper alloy with tin plating. It weighs 7.1g and operates within a temperature range of -5 to +40°C, with a continuous operating temperature from -35 to +85°C. Packaged in boxes of 50 pieces, it is manufactured in Germany, with a GTIN of 4045454233235 and a customs tariff number of 85366990990. It complies with RoHS without exemptions.