890-1102 WAGO Electrical Connector Accessories

WAGO 890-1102 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 250V (III/3), a rated impulse voltage of 4kV (III/3), and a rated current of 16A. It is designed for overvoltage category III and pollution degree 3 environments. For the US market, certain versions may be used for current interruption in applications with currents below 5A and voltages up to 600V, as per UL 1977, which rates this part for a voltage of 600V and a current of 14A. The part has approximately 1mΩ of contact resistance and about 0.25mΩ contact transition plug/socket. It offers two connection points and the same number of potentials, utilizing Push-in CAGE CLAMP technology for connection, with an actuation type of operating tool or push-in. The nominal cross-section for connection 1 is 1.5mm2 / 16 AWG, accommodating various conductor types and sizes, with a strip length of 9mm / 0.35" and a pole number of 2. The conductor entry direction to mating direction is 0°. Physically, it has a pin spacing of 4.4mm / 0.173", dimensions of 10.4mm width, 11.7mm height, and 34.1mm depth, and is suitable for DALI and lighting management applications. It features IP20 protection, upgradeable to IP40 with strain relief housing, and is equipped with female connector/socket for pluggable connections, including mismating protection and a locking lever for secure connections. The part is blue with a gray cover, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel for the clamping spring and tin-plated copper or copper alloy for contacts. It weighs 2.6g, operates within a temperature range of -5...+40°C (processing) and -35...+85°C (continuous), and is RoHS compliant. Packaged in boxes of 50 pieces, it is manufactured in Poland with a GTIN of 4055143548472 and a customs tariff number of 85366990990.