770-1165 WAGO Electrical Connector Accessories

WAGO 770-1165 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A. It is designed for overvoltage category III and pollution degree 3 environments. For the US market, certain versions may be used for current interruption in applications with currents below 16A and voltages up to 600V, as per UL 1977, which rates it for a voltage of 600V and a current of 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It offers 10 connection points, 5 total number of potentials, and utilizes Push-in CAGE CLAMP technology for connection, supporting a nominal cross-section of 4mm2 / 12 AWG. The part accommodates a wide range of conductor sizes and types, including solid, stranded, and fine-stranded conductors, with specific allowances for push-in termination and ferrules. It has a strip length of 9mm / 0.35", a pole number of 5, and a conductor entry direction to mating direction of 0°. Physically, it has a pin spacing of 10mm / 0.394", a width of 50mm / 1.969", a height of 12.9mm / 0.508", and a depth of 37.5mm / 1.476". Designed for emergency power supply applications, it features a coding of L, no variable coding, and potential marking of N PE L N' L'. It ensures a mating force of approximately 20...70N, a retention force of >80N when locked, and an unmating force of approximately 20...70N, supporting up to 200 mating cycles without resistive load. The protection type is IP20, enhancing to IP2xC when mated and secured with a strain relief housing. It includes a female connector/socket for pluggable connections, with mismating protection and the ability to retrofit a locking lever. The part is dark gray with a gray cover, made from Polyamide (PA66) in the material group I, featuring a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and surface-treated Copper or Copper alloy for contacts, plated with Tin. It has a fire load of 0.303MJ and weighs 15.7g. Suitable for processing temperatures of -5...+40°C and continuous operating temperatures of -35...+85°C, it is RoHS compliant without exemptions. Packaged in boxes of 50 pieces, it is manufactured in Germany with a GTIN of 4050821064381 and a customs tariff number of 85366990990.