756-5312/050-100 WAGO Cable Assemblies

WAGO 756-5312/050-100 is an automation part with an operating voltage of 250 VAC/DC and an operating current of 4A. It has a rated surge voltage of 1.5kV and an insulation resistance greater than 10^9Ω. The part features a contact resistance of 10mΩ and a conductor resistance of less than or equal to 60Ω. It is designed for environments with a pollution degree of 3 per VDE 0110 and offers protection type IP67, making it suitable for use in conditions with ambient (operating) temperatures ranging from -50 to +90°C statically and -25 to +90°C dynamically. This part is drag chain compatible, supporting a bending radius of 10 times the cable diameter (min.), 2 million bending cycles, a minimum acceleration of 5, a maximum travel speed of 3.33, and maximum travel paths of 5m horizontally and 2m vertically, with a torsional capacity of 180°. The cable length is 10m, with a type code of LiF9YH-11YH or LiF9YC11YFHF, consisting of a bare copper wire conductor configuration, fine-stranded (42 x 0.1mm), conductor insulation of PP9Y (halogen-free), and a sheath material of Polyurethane (PUR). The cable is halogen-free per DIN VDE 0472 Part 815, flame resistant per IEC 332-2, and self-extinguishing. It features a black sheathed cable with a diameter of 4.8 to 5.2mm. The connector has an M12 plug - free end connection type, with a pole number of 5, and a cable connection direction to mating direction of 90°. It is A-coded with a housing material of Polyurethane (PUR) and contact material of CuSn, requiring a tightening torque of 1Nm. The product is packaged in boxes, with a single piece per unit (SPU), originating from Hungary (HU), and has a GTIN of 4045454536435 with a customs tariff number of 85444290900. It complies with RoHS, including an exemption 6(c), and has various SCIP notification numbers for compliance across multiple European countries.