756-1203/060-050 WAGO Industrial Automation Components

WAGO 756-1203/060-050 is an automation part with an operating voltage of 250V, an operating current of 4A, a rated surge voltage of 2kV, and an insulation resistance of over 5 x 10^8Ω. It features a contact resistance of 10mΩ and a conductor resistance of less than 57Ω. Designed for environments with a pollution degree of 3/2 per IEC 60664-1, it offers IP67 protection and can operate in ambient temperatures ranging from -40 to +70°C, both statically and dynamically. This part is compatible with drag chains, supporting a minimum bending diameter of 200, a bending radius of single 5 x cable diameter (min.), and multiple 7.5 x cable diameter (min.), with up to 3 million bending cycles, a minimum acceleration of 4, a maximum travel speed of 4, and a maximum horizontal travel path of 10. The cable length is 5m, with a type code of 02YH(ST)C11Y 2x2x0.75/1.5-100 LI GN VZN FRNC, featuring an overlapped aluminium-laminated foil and tinned copper braid shield for approximately 85% optical coverage. The conductor configuration consists of bare copper wire (7 x 0.25mm), insulated with halogen-free PE, and a sheath material of polyurethane (PUR), which is halogen-free per VDE 0250 Part 818 and flame resistant per IEC 60332-1-2. The sheathed cable diameter ranges from 6.3 to 6.7mm. Connection is facilitated through an M12 plug to M12 plug, with a 4 pole number and a cable connection direction to mating direction of 0°, featuring D-coded connector interface coding on both cable/adapter ends. The housing material is TPU/TPU in black (RAL 9005), with contact material of CuZn and a tightening torque of 1Nm. It is RoHS compliant, packaged individually in a box, with a country of origin in Germany and a GTIN of 4045454521844.