750-891 WAGO Industrial Automation Components

WAGO 750-891 Wago 750-891 is a Programmable Logic Controller (PLC) CPU unit featuring a 32-bit processor and supports various communication protocols including HTTP, BootP, DHCP, DNS, SNTP, FTP, and SNMP. It operates on a supply voltage of 18-31.2Vdc via wiring with a nominal 24Vdc and has no AC supply voltage. The unit provides connection through 2 x RJ45 connectors for fieldbus, a cage-clamp 2-pin for the system, and a cage-clamp 6-pin for the field. Designed as Gen.4, it has an ambient air temperature operation range of C...+55°C and a storage temperature range of C...+85°C. The CPU unit offers a speed of 10Mbit/s and 100Mbit/s, with an IP20 degree of protection and a net width of 61.5 mm. It supports Modbus TCP and Ethernet communication protocols, has a rated insulation voltage (Ui) suitable for DIN-35 rail mounting, and dimensions of H100mm x W61.5mm x D71.9mm. The housing is made of Polycarbonate (PC) / Polyamide (PA) 6.6, capable of 250 x connections per node and 64 x field devices. It features 32kB of non-volatile memory for software, 4MB for program memory, and 4MB for data memory. The unit is vibration resistant according to EN 60068-2-6 -- 4g and shock-resistant according to EN 60068-2-27 --15g. It has a current consumption of 500mA at 24Vdc nominal load, 390mA at 5Vdc system supply, and 1700mA system supply. The control circuit's rated current supports various programming environments and configurations, including Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), Sequential Function Chart (SFC), WAGO-I/O-PRO V2.3, WAGO-I/O-CHECK, Web-Based Management, and CODESYS Library. It operates at 95% relative humidity (RH), non-condensing.

Part#:750-891

Manufacturer:WAGO

Product Lifecycle:Active

In-stock parts: 6

Sep 19, 2024

Wago 750-891 is a Programmable Logic Controller (PLC) CPU unit featuring a 32-bit processor and supports various communication protocols including HTTP, BootP, DHCP, DNS, SNTP, FTP, and SNMP. It operates on a supply voltage of 18-31.2Vdc via wiring with a nominal 24Vdc and has no AC supply voltage. The unit provides connection through 2 x RJ45 connectors for fieldbus, a cage-clamp 2-pin for the system, and a cage-clamp 6-pin for the field. Designed as Gen.4, it has an ambient air temperature operation range of C...+55°C and a storage temperature range of C...+85°C. The CPU unit offers a speed of 10Mbit/s and 100Mbit/s, with an IP20 degree of protection and a net width of 61.5 mm. It supports Modbus TCP and Ethernet communication protocols, has a rated insulation voltage (Ui) suitable for DIN-35 rail mounting, and dimensions of H100mm x W61.5mm x D71.9mm. The housing is made of Polycarbonate (PC) / Polyamide (PA) 6.6, capable of 250 x connections per node and 64 x field devices. It features 32kB of non-volatile memory for software, 4MB for program memory, and 4MB for data memory. The unit is vibration resistant according to EN 60068-2-6 -- 4g and shock-resistant according to EN 60068-2-27 --15g. It has a current consumption of 500mA at 24Vdc nominal load, 390mA at 5Vdc system supply, and 1700mA system supply. The control circuit's rated current supports various programming environments and configurations, including Instruction List (IL), Ladder Diagram (LD), Function Block Diagram (FBD), Continuous Function Chart (CFC), Structured Text (ST), Sequential Function Chart (SFC), WAGO-I/O-PRO V2.3, WAGO-I/O-CHECK, Web-Based Management, and CODESYS Library. It operates at 95% relative humidity (RH), non-condensing.

About the manufacturer: WAGO is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. WAGO is the global leader in spring clamp technology for electrical connections and ranks among the top suppliers of components for industrial and building automation. With 28 companies and 9 production facilities employing around 9,000 people worldwide, we ensure expert advice and close customer relationships.

Check out the 750-891 WAGO price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

750-891 Description

This item can ship within 5 days!

1-year warranty

$1,650.47

Stock:

Select Qty:

$1,650.47

$1,650.47 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of WAGO

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

WAGO Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many WAGO Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from WAGO, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

This item can ship within 24h!

2002-1301

$1.99

Verified stock: 303

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2002-1201

$1.59

Verified stock: 115

Wago 2002-1201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width of 5.2 mm, and is compatible with DIN-35 rail for mounting. The terminal block is designed for use with 0.25mm² to 4mm² fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm² nominal cross-section. Constructed from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) connections and supports a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). Its dimensions are H48.5mm x W5.2mm x D32.9mm, and it is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2204-1204

$2.04

Verified stock: 2,518

Wago 2204-1204 is a neutral-through terminal block designed for push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 32A (IEC), 41A (IEC), 30A (UL), 30A (CSA), 31A (Ex e II), and 30A (Ex e II with jumper). This 1-deck/level terminal features side and center marking slots, is suitable for Ex e II / Ex I applications, and includes a test port. The net height is rated at 8 kV for impulse voltage (Uimp), with dimensions of H52.3mm x W6.2mm x D32.9mm. It accommodates 0.5mm2 to 6mm2 fine stranded or solid conductors and #20AWG to #10AWG fine stranded or solid conductors, with a 4mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66, has 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts, and is designed for a diameter of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series, suitable for mounting on DIN-35 rail (35 x 15 / 35 x 7.5), and features a blue and orange actuator.

WAGO

This item can ship within 24h!

2202-1201

$1.65

Verified stock: 15

Wago 2202-1201 is a feed-through terminal block designed for efficient wire connection and distribution. It features Push-in CAGE CLAMP spring connections for secure and maintenance-free wire termination. This terminal block is rated for various currents: 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). It is a 1-deck terminal with side and center marking slots, suitable for Ex e II applications, and includes a test port. The terminal block has a net height of 8 kV for impulse voltage, a width of 5.2 mm, and is designed for a single feed-through pole (1P). It mounts on a DIN-35 rail and comes in gray with an orange actuator. The dimensions are H48.5mm x W5.2mm x D32.9mm, accommodating wire sizes from 0.25mm2 to 4mm2 or #22AWG to #12AWG, with a nominal cross-section of 2.5mm2. The terminal block is made from Polyamide (PA) 66 and supports 2-wires connection (1 push-in + 1 push-in) (1+1). It is rated for a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

25.313.1053.0

$11.78

Verified stock: 40

PIN TERM.BUSHING 8213 S /10 DFWW M

Wieland

This item can ship within 24h!

2002-1401

$2.54

Verified stock: 4,769

Wago 2002-1401 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots and is suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width for 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and has dimensions of H69.9mm x W5.2mm x D32.9mm. It accommodates 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it features 4-wires (2 push-in + 2 push-in) connections. The terminal block is rated for a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

This item can ship within 24h!

2204-1201

$2.03

Verified stock: 41

Wago 2204-1201 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for easy wire installation. This terminal block is rated for various currents: 32A (IEC), 41A (IEC), 30A (UL), 30A (CSA), 31A (Ex e II), and 30A (Ex e II with jumper). It is a 1-deck terminal with side and center marking slots, suitable for Ex e II applications, and includes a test port. The terminal block has a net height of 6.2 mm and is designed for mounting on DIN-35 rail. It accommodates 0.5mm² to 6mm² fine stranded or solid conductors and #20AWG to #10AWG fine stranded or solid conductors, with a 4mm² nominal cross-section. The housing is made of Polyamide (PA) 66, and it supports 2-wires connection (1 push-in + 1 push-in) for each terminal. The terminal block is rated for a voltage of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and it is part of the TOPJOB S series. The dimensions are H52.3mm x W6.2mm x D32.9mm, and it comes in gray with an orange actuator.

WAGO

This item can ship within 24h!

2202-1301

$2.01

Verified stock: 50

Wago 2202-1301 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for easy wire installation. This terminal block is rated for various currents: 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). It is a single-deck terminal with side and center marking slots, equipped with a test port and suitable for Ex e II applications. The terminal block has a net height of 8 kV for impulse voltage, a width for one feed-through pole (1P), and is designed to mount on a DIN-35 rail. It comes in gray with an orange actuator, measuring 59.2mm in height, 5.2mm in width, and 32.9mm in depth. It accommodates 0.25mm² to 4mm² fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm² nominal cross-section. The terminal block is made from Polyamide (PA) 66, supports 3-wires connections (1 push-in + 2 push-in) (1+2), and operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). It is part of the TOPJOB S series.

WAGO

This item can ship within 24h!