750-365/040-010 WAGO Programmable Logic Controllers

WAGO 750-365/040-010 is an automation part designed for EtherNet/IP™ communication, supporting ETHERNET protocols such as HTTP(S), BootP, DHCP, DNS, FTP(S), and SNMP with a baud rate of 10/100Mbit/s. It utilizes a twisted pair S-UTP with 100Ω, Cat. 5, M12 D-coded cable for transmission over a maximum length of 100m and adheres to Class D transmission performance per EN 50173. This part can accommodate up to 64 modules per node and offers configuration options through WAGO-I/O-CHECK, Web-Based Management, or CODESYS Library. It has a maximum input and output process image of 1020 words each for fieldbus communication. The system supply voltage is 24 VDC via a pluggable connector with a CAGE CLAMP connection, requiring observation of derating. It consumes 350mA from a 5V system supply and has a total system supply current of 1,700mA. The field supply voltage is also 24 VDC, with power supplied through a pluggable connector and transmission via power jumper contacts, again noting the importance of derating. Typical input current at nominal load is 500mA, with a power supply efficiency of 90% at nominal load. It is rated for a surge voltage of 1kV and features LED indicators for network connection, node and network status, and local data bus status. The current carrying capacity for power jumper contacts is 10A, with specific derating guidelines provided for varying ambient temperatures. Connection technology includes EtherNet/IP™ with 2 x M12 socket, 4-pole, D-coded for communication/fieldbus, and CAGE CLAMP for both field and system supply, plus a 4-pole male connector for device configuration. It supports both solid and fine-stranded conductors ranging from 0.25 to 2.5mm2 (24 to 14 AWG) with a strip length of 8 to 9mm. The part measures 112mm in width, 100mm in height, and 71.9mm in depth, with a mounting depth from the upper edge of the DIN-rail at 64.7mm, and is designed for mounting on a DIN-35 rail. The housing is made from polycarbonate and polyamide 6.6, with a fire load of 3.298MJ and a weight of 213.8g. It carries a CE conformity marking and is designed to operate in ambient temperatures ranging from -40 to +70°C, with storage temperatures from -40 to +85°C. The protection type is IP20, with a pollution degree of 2 per IEC 61131-2. It can operate without temperature derating up to an altitude of 2000m, with specific derating above this up to a maximum of 5000m. The part is resistant to vibration and shock per various IEC and EN standards, has EMC immunity and emission compliance for a wide range of applications, and is resistant to pollutants including H2S and SO2 within specified concentrations. It is compliant with RoHS, with specific exemptions noted, and has SCIP notification numbers for multiple countries. The part is packaged individually in a box, with a country of origin in DE, and has a GTIN of 4055143923118 and a customs tariff number of 85371091990.