750-340 WAGO Programmable Logic Controllers

WAGO 750-340 is a PROFINET IO communication module supporting ETHERNET protocols DCP and HTTP. It operates with PROFINET RT V2.0 (RT Class 1) and conforms to Class A. The module does not specify a baud rate but allows a maximum bus segment length of 100m using Twisted Pair S-UTP with 100Ω impedance, Cat. 5. It can support up to 128 modules per node and 64 modules without a bus extension. The input and output process image for the fieldbus is maximized at 320 bytes each. The system supply voltage is 24 VDC (-15...+20%) through a pluggable connector with CAGE CLAMP connection, drawing a current consumption of 300mA from the 5V system supply and providing a total current of 1,700mA. The field supply voltage mirrors the system's at 24 VDC (-15...+20%), with a typical input current at nominal load of 500mA and an efficiency of 87%. Isolation between system and field is rated at 500V, with three outgoing power jumper contacts capable of carrying 10A each. Connection technologies include PROFINET IO via 1 x RJ-45 for communication/fieldbus, 6 x CAGE CLAMP for field supply, 2 x CAGE CLAMP for system supply, and 1 x Male connector, 4-pole for device configuration. It supports both solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 14 AWG) with a strip length of 8 to 9mm. Physically, the module measures 50.5mm in width, 100mm in height, and 71.1mm in depth, with a mounting depth from the upper edge of the DIN-rail at 63.9mm. It is designed for mounting on a DIN-35 rail, housed in light gray polycarbonate and polyamide 6.6, with a fire load of 3.531MJ and a weight of 182.4g. The module is CE marked, operates within an ambient temperature range of 0 to +55°C, and can be stored between -25 and +85°C. It is rated IP20 for protection, with a pollution degree of 2 per IEC 61131-2, and can operate up to an altitude of 2000m. The module is resistant to vibrations and shocks as per IEC standards, complies with EMC immunity and emission standards, and can withstand certain levels of H2S and SO2 contaminants. It is part of product group 15 (I/O System), classified under eClass 10.0 and 9.0 as 27-24-26-07, and ETIM 8.0 and 7.0 as EC001603. Packaged individually in a box, it is manufactured in Germany with a GTIN of 4045454526979 and a customs tariff number of 85176200000. The module complies with environmental regulations, including RoHS with specific exemptions, and has SCIP notification numbers for Bulgaria and the Czech Republic.