250-102/000-006 WAGO Terminal Blocks

WAGO 250-102/000-006 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1. It has a nominal voltage of 160V for overvoltage category III/3 and III/2, and 320V for category II/2, with a rated impulse voltage of 2.5kV across these categories. The rated current is 8A according to IEC/EN standards. Under UL 1059, it has a rated voltage of 300V and a rated current of 5A for both Use Groups B and D, while CSA approvals indicate a rated voltage of 300V and a rated current of 10A for these groups. This part features two connection points, one level, and supports push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 1.5mm2 (24 to 16 AWG), and fine-stranded conductors with both insulated and uninsulated ferrules from 0.25 to 1mm2. The strip length for connection is between 8.5 to 9.5mm, and the conductor connection direction to PCB is at 45 degrees. It has a pole number of 2, pin spacing of 3.5mm, and dimensions of 8.5mm in width, 16.7mm in height, 13.1mm height from the surface, and 12mm in depth. The solder pin length is 3.4mm with dimensions of 0.4 x 0.75mm, and it requires a drilled hole diameter of 1.1mm (+0.1). The terminal is designed for THT PCB contact with in-line solder pin arrangement and one solder pin per potential. It is blue, made from Polyamide (PA66) with a flammability class of V0, and uses a copper alloy for the clamping spring with tin contact plating. The fire load is 0.026MJ, and it weighs 1.1g. It operates within a temperature range of -60 to +105°C. This product is part of WAGO's Printed Circuit Connectors group, compliant with RoHS, and comes in a box of 560 pieces with the country of origin being CH. The GTIN is 4044918647090, and the customs tariff number is 85369010000.