​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PS003A-503-LI2UPN8X-H1141 Turck Industrial Automation Components

Turck PS003A-503-LI2UPN8X-H1141 Turck PS003A-503-LI2UPN8X-H1141 is a sensor designed for pressure measurement with a differential programmable pressure sensor/switch functionality. It features a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and has a rotatable housing design for flexible installation. The connection is facilitated by a pre-equipped 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. As part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor's cylindrical body is made from 1.4305 (303) stainless steel, including the housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It supports pressures from 0 to +3bar and uses the IO-Link communication protocol. The operating mode can be programmed as NO (Normally Open) or NC (Normally Closed), and it includes 2 x digital outputs (15-30Vdc; NPN/PNP). Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, with a set point accuracy of +/-0.5% FS and analog accuracy of ≤+/-0.5% FS. It has a maximum switching frequency of 180Hz and a current consumption of 50mA.
Turck

Part#:PS003A-503-LI2UPN8X-H1141

Manufacturer:Turck

Product Lifecycle:Discontinued

Get a quick Quote!

Turck PS003A-503-LI2UPN8X-H1141 is a sensor designed for pressure measurement with a differential programmable pressure sensor/switch functionality. It features a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and has a rotatable housing design for flexible installation. The connection is facilitated by a pre-equipped 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port. As part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor's cylindrical body is made from 1.4305 (303) stainless steel, including the housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It supports pressures from 0 to +3bar and uses the IO-Link communication protocol. The operating mode can be programmed as NO (Normally Open) or NC (Normally Closed), and it includes 2 x digital outputs (15-30Vdc; NPN/PNP). Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, with a set point accuracy of +/-0.5% FS and analog accuracy of ≤+/-0.5% FS. It has a maximum switching frequency of 180Hz and a current consumption of 50mA.

About the manufacturer: Turck is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. Turck is a leading provider of sensor, fieldbus, and connectivity technologies, along with interface technology, human-machine interfaces (HMI), and RFID systems. We offer innovative solutions for factory and process automation requirements, guaranteeing top-notch performance.

Check out the PS003A-503-LI2UPN8X-H1141 Turck price in the box on the right side or send a quick quote.

Product Details

  • Ambient temperature
    -40…+80 °C
  • Protection class
    IP67/IP69K
  • Housing material
    Stainless-steel/Plastic, 1.4305 (AISI 303)
  • Medium temperature
    -40…+85 °C
  • Pressure transducer material
    Ceramics Al2O3
  • Electrical connection
    Connector, M12 × 1
  • Communication protocol
    IO-Link
  • Voltage output
    0…10 V
  • Current output
    4…20 mA
  • Design
    With display
  • Absolute pressure psi
    0…36.26 psi abs.
  • Electrical output
    Current output (3-wire), 2 × switching output
  • Process connection
    1/4” NPT-18 male thread
  • Operating voltage
    18…30 VDC
  • Pressure type
    Absolute pressure
  • Absolute pressure bar
    0…2.5 bar abs.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

Related documents PS003A-503-LI2UPN8X-H1141 Specs

PS003A-503-LI2UPN8X-H1141 English-1630966364597.pdf

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Turck

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Turck Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Turck Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Turck, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PS400R-504-LI2UPN8X-H1141 Part Image. Manufactured by Turck.

PS400R-504-LI2UPN8X-H1141

Verified stock: 0

Turck PS400R-504-LI2UPN8X-H1141 is a sensor designed for pressure measurement and switching, belonging to the PS500 series. It features a programmable relative pressure sensor/switch with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and is designed with a rotatable housing of 34mm diameter. The connection is facilitated by a pre-equipped 4-pin M12 Eurofast QD male connector and a 7/16"-20 UNF threaded male process port (SAE-ORB). It offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's body is cylindrical, and it can operate at a maximum switching frequency of 180Hz. It is constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. The pressure range is 0 to +400bar (0 to +5800psig), and it supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C. It offers programmable operating modes of NO (Normally Open) or NC (Normally Closed), with two digital outputs (15-30Vdc; NPN/PNP). Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, with a measurement accuracy of set point accuracy +/-0.5% FS and analog accuracy ≤+/-0.5% FS. The control circuit rated current is 200mA, with a current consumption of 50mA, and it features time delays for ON-delay and OFF-delay settings of 0-50.

Turck

PS025D-502L-2UPN8X-H1141 Part Image. Manufactured by Turck.

PS025D-502L-2UPN8X-H1141

Verified stock: 0

Turck PS025D-502L-2UPN8X-H1141 is a sensor designed for pressure measurement with a differential programmable pressure sensor feature. It offers a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and features a rotatable housing design. This model is equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded female process port for connections. As part of the PS500 series, it has an IP67 degree of protection and requires a supply voltage of 18-30Vdc, with 24Vdc nominal. The sensor has a cylindrical body shape and can reach a maximum switching frequency of 180Hz. It is constructed with a 1.4305 (303) stainless steel housing, wetted parts, and pressure connection, along with a ceramics Al2O3 pressure transducer. The pressure range of this sensor is 0 to +25bar. It supports IO-Link communication protocol and offers operating modes of NO (Normally Open) or NC (Normally Closed), which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, and it features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output). The measurement accuracy includes a set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, with repeatability ≤0.5% of the measuring range, and zero shift/span shift ≤0.15% of the measuring range per °C. The current consumption is 50mA.

Turck

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo