This item can ship within 24h!

ATV630D15N4

$1.30

Schneider Electric ATV630D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, and sensorless estimated flow rate. The drive offers accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. It also includes overvoltage limitation at motor terminals, continuous and historical real-time measurements with customizable dashboards, and predictive and preventive maintenance tracking functions. Designed with a built-in EMC filter (class C2) and ATEX compliance, it operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 31.7A (normal-duty; 4kHz), 23.5A (heavy-duty; 4kHz), with a maximum current of 34.9A (normal-duty; for 60s) and 35.3A (heavy-duty; for 60s). It supports wall mounting, uses Modbus and Modbus TCP Ethernet for communication, and is designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. The drive includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off. It also features 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operating conditions, and the rated active power is 15kW (normal-duty) and 11kW (heavy-duty), corresponding to 20HP and 15HP respectively.

Schneider Electric

This item can ship within 24h!

ATV630D22N4

$1.45

Verified stock: 3

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

This item can ship within 24h!

ATV630D37N4

$2.50

Verified stock: 2

Schneider Electric ATV630D37N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. The drive limits overvoltage at motor terminals and supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H673mm x W226mm x D271mm, with an IP21 UL type 1 degree of protection. Rated current is 74.5A (normal-duty; 4kHz), 61.5A (heavy-duty; 4kHz), with a maximum current of 82A (normal-duty; for 60s) and 92.3A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet, designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off (STO), alongside 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts). Analog inputs include 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operational modes, with rated active power of 37kW (normal-duty) and 30kW (heavy-duty), corresponding to 50HP and 40HP, respectively.

Schneider Electric

This item can ship within 24h!

ATV930D22N4

$1.13

Verified stock: 8

Schneider Electric ATV930D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 930 series. It features an enclosed design with Safe Torque Off (STO) functionality up to SIL3, constant load torque standard, and optimized torque mode for PM (permanent magnet) motors. This model offers motor control with an overload torque up to 180% Tn in both open or closed loops and supports Master/Slave and load sharing with drive-to-drive capability. It includes continuous and historical real-time measurements with customizable dashboards and predictive maintenance capabilities. The ATV930D22N4 comes with a built-in EMC filter (class C2), a built-in braking unit, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Its dimensions are H545.9mm x W211mm x D235mm, with an IP21 degree of protection. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 55.6A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and supports communication protocols such as Modbus, Modbus TCP, and Ethernet/IP. The network is 3-phase (3P) with an output frequency of 0.1-599 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 6 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. Additionally, it has 1 x digital output (24Vdc; 30kHz pulse max), 1 x digital output (24Vdc; 1kHz PTO), 1 x digital output (C/O SPDT relay contact), 2 x digital outputs (NO relay contacts), and 3 x analog inputs for versatile connectivity. The current consumption is specified for different voltages and duties, with a rated active power of 22kW (normal-duty) and 18.5kW (heavy-duty), equivalent to 30HP and 25HP respectively.

Schneider Electric

This item can ship within 3 days!

S8VK-G24024

$172.07

Verified stock: 6

Power Supply, Switch Mode, 240W, 24V, 10 A, In 20-10AWG, 14-10AWG, S8VK Series

Omron

This item can ship within 24h!

ATV630D45N4

$1.80

Verified stock: 9

Schneider Electric ATV630D45N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This model operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.) and has dimensions of H673mm x W226mm x D271mm. It supports a rated current of 88A (normal-duty; 4kHz), 74.5A (heavy-duty; 4kHz), with a maximum current of 96.8A (normal-duty; for 60s) and 111.8A (heavy-duty; for 60s). The ATV630D45N4 offers various functions including STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. It features embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and supports predictive and preventive maintenance tracking functions. The network frequency output ranges from 0.1-500 Hz on a 3-phase network. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) programmable as DI1-DI4, 2 digital inputs (24Vdc; sink/source) programmable as pulse inputs DI5-DI6, 1 digital input for STO (24Vdc; source) as STOA and STOB, and 1 digital output (C/O SPDT relay contact) plus 2 digital outputs (NO relay contacts). The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The current consumption is rated at 79.8A (380Vac; normal-duty) and 67.1A (380Vac; heavy-duty) with a rated active power of 45kW (normal-duty) and 37kW (heavy-duty), equivalent to 60HP (normal-duty) and 50HP (heavy-duty). Communication is facilitated through Modbus, Modbus TCP, and Ethernet protocols.

Schneider Electric

This item can ship within 24h!

MFKS 3-0.2

$13.36

Verified stock: 476

Turck MFKS 3-0.2 Receptacle, Straight Female, 3, 24 AWG, 4 A, 125 VAC/VDC, Nickel Plated Brass

Turck

This item can ship within 24h!

2902992

$63.19

Verified stock: 39

Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W

Phoenix Contact

This item can ship within 24h!

ATV630D15N4

$1.30

Verified stock: 2

Schneider Electric ATV630D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, and sensorless estimated flow rate. The drive offers accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. It also includes overvoltage limitation at motor terminals, continuous and historical real-time measurements with customizable dashboards, and predictive and preventive maintenance tracking functions. Designed with a built-in EMC filter (class C2) and ATEX compliance, it operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 31.7A (normal-duty; 4kHz), 23.5A (heavy-duty; 4kHz), with a maximum current of 34.9A (normal-duty; for 60s) and 35.3A (heavy-duty; for 60s). It supports wall mounting, uses Modbus and Modbus TCP Ethernet for communication, and is designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. The drive includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off. It also features 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operating conditions, and the rated active power is 15kW (normal-duty) and 11kW (heavy-duty), corresponding to 20HP and 15HP respectively.

Schneider Electric

This item can ship within 24h!

ATV630D22N4

$1.45

Verified stock: 3

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

This item can ship within 24h!

ATV630D37N4

$2.50

Verified stock: 2

Schneider Electric ATV630D37N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. The drive limits overvoltage at motor terminals and supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H673mm x W226mm x D271mm, with an IP21 UL type 1 degree of protection. Rated current is 74.5A (normal-duty; 4kHz), 61.5A (heavy-duty; 4kHz), with a maximum current of 82A (normal-duty; for 60s) and 92.3A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet, designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off (STO), alongside 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts). Analog inputs include 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operational modes, with rated active power of 37kW (normal-duty) and 30kW (heavy-duty), corresponding to 50HP and 40HP, respectively.

Schneider Electric

This item can ship within 24h!

ATV930D22N4

$1.13

Verified stock: 8

Schneider Electric ATV930D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 930 series. It features an enclosed design with Safe Torque Off (STO) functionality up to SIL3, constant load torque standard, and optimized torque mode for PM (permanent magnet) motors. This model offers motor control with an overload torque up to 180% Tn in both open or closed loops and supports Master/Slave and load sharing with drive-to-drive capability. It includes continuous and historical real-time measurements with customizable dashboards and predictive maintenance capabilities. The ATV930D22N4 comes with a built-in EMC filter (class C2), a built-in braking unit, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Its dimensions are H545.9mm x W211mm x D235mm, with an IP21 degree of protection. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 55.6A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and supports communication protocols such as Modbus, Modbus TCP, and Ethernet/IP. The network is 3-phase (3P) with an output frequency of 0.1-599 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 6 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. Additionally, it has 1 x digital output (24Vdc; 30kHz pulse max), 1 x digital output (24Vdc; 1kHz PTO), 1 x digital output (C/O SPDT relay contact), 2 x digital outputs (NO relay contacts), and 3 x analog inputs for versatile connectivity. The current consumption is specified for different voltages and duties, with a rated active power of 22kW (normal-duty) and 18.5kW (heavy-duty), equivalent to 30HP and 25HP respectively.

Schneider Electric

This item can ship within 3 days!

S8VK-G24024

$172.07

Verified stock: 6

Power Supply, Switch Mode, 240W, 24V, 10 A, In 20-10AWG, 14-10AWG, S8VK Series

Omron

This item can ship within 24h!

ATV630D45N4

$1.80

Verified stock: 9

Schneider Electric ATV630D45N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This model operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.) and has dimensions of H673mm x W226mm x D271mm. It supports a rated current of 88A (normal-duty; 4kHz), 74.5A (heavy-duty; 4kHz), with a maximum current of 96.8A (normal-duty; for 60s) and 111.8A (heavy-duty; for 60s). The ATV630D45N4 offers various functions including STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. It features embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and supports predictive and preventive maintenance tracking functions. The network frequency output ranges from 0.1-500 Hz on a 3-phase network. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) programmable as DI1-DI4, 2 digital inputs (24Vdc; sink/source) programmable as pulse inputs DI5-DI6, 1 digital input for STO (24Vdc; source) as STOA and STOB, and 1 digital output (C/O SPDT relay contact) plus 2 digital outputs (NO relay contacts). The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The current consumption is rated at 79.8A (380Vac; normal-duty) and 67.1A (380Vac; heavy-duty) with a rated active power of 45kW (normal-duty) and 37kW (heavy-duty), equivalent to 60HP (normal-duty) and 50HP (heavy-duty). Communication is facilitated through Modbus, Modbus TCP, and Ethernet protocols.

Schneider Electric

This item can ship within 24h!

MFKS 3-0.2

$13.36

Verified stock: 476

Turck MFKS 3-0.2 Receptacle, Straight Female, 3, 24 AWG, 4 A, 125 VAC/VDC, Nickel Plated Brass

Turck

This item can ship within 24h!

2902992

$63.19

Verified stock: 39

Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W

Phoenix Contact

This item can ship within 24h!

ATV630D15N4

$1.30

Verified stock: 2

Schneider Electric ATV630D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, and sensorless estimated flow rate. The drive offers accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. It also includes overvoltage limitation at motor terminals, continuous and historical real-time measurements with customizable dashboards, and predictive and preventive maintenance tracking functions. Designed with a built-in EMC filter (class C2) and ATEX compliance, it operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 31.7A (normal-duty; 4kHz), 23.5A (heavy-duty; 4kHz), with a maximum current of 34.9A (normal-duty; for 60s) and 35.3A (heavy-duty; for 60s). It supports wall mounting, uses Modbus and Modbus TCP Ethernet for communication, and is designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. The drive includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off. It also features 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operating conditions, and the rated active power is 15kW (normal-duty) and 11kW (heavy-duty), corresponding to 20HP and 15HP respectively.

Schneider Electric

This item can ship within 24h!

ATV630D22N4

$1.45

Verified stock: 3

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

This item can ship within 24h!

ATV630D37N4

$2.50

Verified stock: 2

Schneider Electric ATV630D37N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. The drive limits overvoltage at motor terminals and supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H673mm x W226mm x D271mm, with an IP21 UL type 1 degree of protection. Rated current is 74.5A (normal-duty; 4kHz), 61.5A (heavy-duty; 4kHz), with a maximum current of 82A (normal-duty; for 60s) and 92.3A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet, designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off (STO), alongside 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts). Analog inputs include 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operational modes, with rated active power of 37kW (normal-duty) and 30kW (heavy-duty), corresponding to 50HP and 40HP, respectively.

Schneider Electric

This item can ship within 24h!

ATV930D22N4

$1.13

Verified stock: 8

Schneider Electric ATV930D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 930 series. It features an enclosed design with Safe Torque Off (STO) functionality up to SIL3, constant load torque standard, and optimized torque mode for PM (permanent magnet) motors. This model offers motor control with an overload torque up to 180% Tn in both open or closed loops and supports Master/Slave and load sharing with drive-to-drive capability. It includes continuous and historical real-time measurements with customizable dashboards and predictive maintenance capabilities. The ATV930D22N4 comes with a built-in EMC filter (class C2), a built-in braking unit, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Its dimensions are H545.9mm x W211mm x D235mm, with an IP21 degree of protection. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 55.6A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and supports communication protocols such as Modbus, Modbus TCP, and Ethernet/IP. The network is 3-phase (3P) with an output frequency of 0.1-599 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 6 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. Additionally, it has 1 x digital output (24Vdc; 30kHz pulse max), 1 x digital output (24Vdc; 1kHz PTO), 1 x digital output (C/O SPDT relay contact), 2 x digital outputs (NO relay contacts), and 3 x analog inputs for versatile connectivity. The current consumption is specified for different voltages and duties, with a rated active power of 22kW (normal-duty) and 18.5kW (heavy-duty), equivalent to 30HP and 25HP respectively.

Schneider Electric

FS 4.4 Turck Electronic Components

Part#:FS 4.4

Manufacturer:Turck

FS 4.4 Product Details

Product condition

Related documents FS 4.4 Specs

Relevant products

ATV630D15N4

ATV630D22N4

ATV630D37N4

ATV930D22N4

S8VK-G24024

ATV630D45N4

MFKS 3-0.2

2902992

ATV630D15N4

ATV630D22N4

ATV630D37N4

ATV930D22N4

S8VK-G24024

ATV630D45N4

MFKS 3-0.2

2902992

ATV630D15N4

ATV630D22N4

ATV630D37N4

ATV930D22N4

We are a proud member of: