This item can ship within 24h!

1050020:0091

$2.94

Verified stock: 114

Zack marker strip, 10-section, vertically labeled with the consecutive numbers: 91 ... 100, white, width: 5 mm

Phoenix Contact

This item can ship within 24h!

NCME106-0050

$30.75

Verified stock: 58

NC(D)M, Stainless Steel Cylinder, Double Acting, Single Rod, Standard

SMC

This item can ship within 24h!

NCDME106-0050

$38.25

Verified stock: 12

NC(D)M, Stainless Steel Cylinder, Double Acting, Single Rod, Standard

SMC

This item can ship within 24h!

NCME056-0050

$25.00

Verified stock: 88

SMC NCM, Air Cylinder

SMC

This item can ship within 24h!

WAGO 231-168/001-000 is a connector part of the MCS - MULTI CONNECTION SYSTEM, designed without breaking capacity as specified in DIN EN 61984, indicating it should not be connected or disconnected under load or when live. It adheres to IEC/EN 60664-1 standards, with nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), all with a rated impulse voltage of 4kV. The rated current is 16A. For UL standards, it has a rated voltage of 300V for Use Groups B and D, with rated currents of 15A and 10A respectively, and under UL 1977, it has a rated voltage of 600V and a rated current of 15A. CSA approvals mirror the UL ratings for Use Groups B and D. This part features 8 potentials, a single connection type across one level, and an 8-pole male connector/plug for PCB with a 90° mating direction. It has a pin spacing of 5mm, dimensions of 43.2mm x 17mm x 8.4mm, and a solder pin length of 5mm. The connector is gray, made from Polyamide (PA66) with a V0 flammability class, and uses tin-plated Electrolytic Copper contacts. It operates within a temperature range of -60 to +100°C and is RoHS compliant without exemptions. Packaged in boxes of 100 pieces, it is manufactured in Poland with a GTIN of 4044918928502 and a customs tariff number of 85366930000.

WAGO

This item can ship within 24h!

231-102/026-000

$2.11

Verified stock: 92

WAGO 231-102/026-000 is a connector part of the MCS - MULTI CONNECTION SYSTEM, designed without breaking capacity as per DIN EN 61984, indicating it should not be connected or disconnected under load or when live. It adheres to IEC/EN 60664-1 standards, with nominal voltages of 320V (III/3), 320V (III/2), and 630V (II/2), and a rated impulse voltage of 4kV across these categories. The rated current is 16A. UL and CSA approvals include ratings of 300V and 15A for UL 1059 Use Group B, 300V and 10A for UL Use Group D, and similar ratings for CSA with a 600V and 15A rating under UL 1977. It features two connection points, one connection type, and a single level, utilizing CAGE CLAMP technology for connection, suitable for solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), with specific strip lengths for different conductor types. The connector has a 2-pole number, 5mm pin spacing, and dimensions of 11.5mm in width, 14.3mm in height, and 26.45mm in depth. It includes variable coding, anti-rotation protection, and is made from Polyamide (PA66) with a flammability class of UL94 V0. The contact material is a copper alloy with tin plating. It operates within a temperature range of -60 to +85°C, has a fire load of 0.08MJ, and weighs 3.8g. The product is RoHS compliant, packaged in boxes of 100 pieces, and has a country of origin in Germany.

WAGO

This item can ship within 24h!

231-131

$0.23

Verified stock: 201

WAGO 231-131 is an operating tool designed for male and female connectors with CAGE CLAMP connection. It features a 1-way spacing and has a depth of 20.2mm or 0.79 inches, with pin spacing of 5/7.62mm. This tool is made from glass fiber-reinforced polyamide (PA66 GF), colored white, and falls under the material group I with a flammability class per UL94 of HB. It has a fire load of 0.01MJ and weighs 0.3g. Classified under Product Group 3 (Multi Conn. System), it adheres to eClass 10.0 and 9.0 standards 27-14-11-92, as well as ETIM 8.0 and 7.0 standards EC002848. Packaged in boxes, it comes in units of 100 with a sub-packaging unit (SPU) of 25 pieces. Manufactured in Germany (DE), it has a GTIN of 4017332283168 and a customs tariff number of 82055980000. This product is RoHS compliant without exemptions.

WAGO

This item can ship within 24h!

0808697:0091

$2.93

Verified stock: 6

Zack marker strip flat, 10-section, vertically labeled with the consecutive numbers: 91 ... 100, white

Phoenix Contact

This item can ship within 24h!

1050020:0091

$2.94

Verified stock: 114

Zack marker strip, 10-section, vertically labeled with the consecutive numbers: 91 ... 100, white, width: 5 mm

Phoenix Contact

This item can ship within 24h!

NCME106-0050

$30.75

Verified stock: 58

NC(D)M, Stainless Steel Cylinder, Double Acting, Single Rod, Standard

SMC

This item can ship within 24h!

NCDME106-0050

$38.25

Verified stock: 12

NC(D)M, Stainless Steel Cylinder, Double Acting, Single Rod, Standard

SMC

This item can ship within 24h!

NCME056-0050

$25.00

Verified stock: 88

SMC NCM, Air Cylinder

SMC

This item can ship within 24h!

231-168/001-000

$3.07

Verified stock: 75

WAGO 231-168/001-000 is a connector part of the MCS - MULTI CONNECTION SYSTEM, designed without breaking capacity as specified in DIN EN 61984, indicating it should not be connected or disconnected under load or when live. It adheres to IEC/EN 60664-1 standards, with nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), all with a rated impulse voltage of 4kV. The rated current is 16A. For UL standards, it has a rated voltage of 300V for Use Groups B and D, with rated currents of 15A and 10A respectively, and under UL 1977, it has a rated voltage of 600V and a rated current of 15A. CSA approvals mirror the UL ratings for Use Groups B and D. This part features 8 potentials, a single connection type across one level, and an 8-pole male connector/plug for PCB with a 90° mating direction. It has a pin spacing of 5mm, dimensions of 43.2mm x 17mm x 8.4mm, and a solder pin length of 5mm. The connector is gray, made from Polyamide (PA66) with a V0 flammability class, and uses tin-plated Electrolytic Copper contacts. It operates within a temperature range of -60 to +100°C and is RoHS compliant without exemptions. Packaged in boxes of 100 pieces, it is manufactured in Poland with a GTIN of 4044918928502 and a customs tariff number of 85366930000.

WAGO

This item can ship within 24h!

231-102/026-000

$2.11

Verified stock: 92

WAGO 231-102/026-000 is a connector part of the MCS - MULTI CONNECTION SYSTEM, designed without breaking capacity as per DIN EN 61984, indicating it should not be connected or disconnected under load or when live. It adheres to IEC/EN 60664-1 standards, with nominal voltages of 320V (III/3), 320V (III/2), and 630V (II/2), and a rated impulse voltage of 4kV across these categories. The rated current is 16A. UL and CSA approvals include ratings of 300V and 15A for UL 1059 Use Group B, 300V and 10A for UL Use Group D, and similar ratings for CSA with a 600V and 15A rating under UL 1977. It features two connection points, one connection type, and a single level, utilizing CAGE CLAMP technology for connection, suitable for solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 (28 to 12 AWG), with specific strip lengths for different conductor types. The connector has a 2-pole number, 5mm pin spacing, and dimensions of 11.5mm in width, 14.3mm in height, and 26.45mm in depth. It includes variable coding, anti-rotation protection, and is made from Polyamide (PA66) with a flammability class of UL94 V0. The contact material is a copper alloy with tin plating. It operates within a temperature range of -60 to +85°C, has a fire load of 0.08MJ, and weighs 3.8g. The product is RoHS compliant, packaged in boxes of 100 pieces, and has a country of origin in Germany.

WAGO

This item can ship within 24h!

231-131

$0.23

Verified stock: 201

WAGO 231-131 is an operating tool designed for male and female connectors with CAGE CLAMP connection. It features a 1-way spacing and has a depth of 20.2mm or 0.79 inches, with pin spacing of 5/7.62mm. This tool is made from glass fiber-reinforced polyamide (PA66 GF), colored white, and falls under the material group I with a flammability class per UL94 of HB. It has a fire load of 0.01MJ and weighs 0.3g. Classified under Product Group 3 (Multi Conn. System), it adheres to eClass 10.0 and 9.0 standards 27-14-11-92, as well as ETIM 8.0 and 7.0 standards EC002848. Packaged in boxes, it comes in units of 100 with a sub-packaging unit (SPU) of 25 pieces. Manufactured in Germany (DE), it has a GTIN of 4017332283168 and a customs tariff number of 82055980000. This product is RoHS compliant without exemptions.

WAGO

This item can ship within 24h!