Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

BMI0703P31A Schneider Electric Industrial Automation Components

Schneider Electric BMI0703P31A Schneider Electric BMI0703P31A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder and a keyed shaft, alongside triple (3) motor stacks. The servo motor operates on a supply voltage ranging from 208Vac to 480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a mounting mode with a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac, with rated currents of 2.1A, 1.87A, and 1.71A respectively. The rated active power varies from 0.49kW / 490W at 1600rpm and 208Vac, to 0.89kW / 890W at 3300rpm and 400Vac, reaching up to 0.94kW / 940W at 3800rpm and 480Vac. This motor delivers a maximum torque of 8.06Nm, with stall torque at 2.96Nm, and operational torques of 2.93Nm, 2.58Nm, and 2.35Nm across its specified speeds and voltages. The moment of inertia is noted as 1.67kg.cm2.
Schneider Electric

Part#:BMI0703P31A

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric BMI0703P31A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder and a keyed shaft, alongside triple (3) motor stacks. The servo motor operates on a supply voltage ranging from 208Vac to 480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a mounting mode with a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac, with rated currents of 2.1A, 1.87A, and 1.71A respectively. The rated active power varies from 0.49kW / 490W at 1600rpm and 208Vac, to 0.89kW / 890W at 3300rpm and 400Vac, reaching up to 0.94kW / 940W at 3800rpm and 480Vac. This motor delivers a maximum torque of 8.06Nm, with stall torque at 2.96Nm, and operational torques of 2.93Nm, 2.58Nm, and 2.35Nm across its specified speeds and voltages. The moment of inertia is noted as 1.67kg.cm2.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the BMI0703P31A Schneider Electric price in the box on the right side or send a quick quote.

Product Details

  • Maximum Radial Force Fr
    730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
  • Nominal Speed
    3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase
  • Nominal Output Power
    900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase
  • Nominal Torque
    25.67 lbf.in (2.9 N.m) 208 V three phase 23.90 lbf.in (2.7 N.m) 400 V three phase 20.36 lbf.in (2.3 N.m) 480 V three phase
  • Maximum Current Irms
    12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase
  • Peak Stall Torque
    76.12 lbf.in (8.6 N.m) 208 V three phase 76.12 lbf.in (8.6 N.m) 400 V three phase 76.12 lbf.in (8.6 N.m) 480 V three phase
  • Product Compatibility
    Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
  • Distance Shaft Shoulder-Flange
    0.10 in (2.5 mm)
  • Electrical Connection
    Printed circuit board connector
  • Mounting Holes Diameter
    0.22 in (5.5 mm)
  • Circle Diameter Of The Mounting Holes
    2.95…3.23 in (75…82 mm)
  • Number Of Mounting Holes
    4
  • Centring Collar Depth
    0.10 in (2.5 mm)
  • Centring Collar Diameter
    2.36 in (60 mm)
  • Number Of Motor Stacks
    3
  • Length
    11.81 in (300 mm)
  • Type Of Cooling
    Natural convection
  • Maximum Axial Force Fa
    0.2 x Fr
  • Stator Electrical Time Constant
    3.2 ms 68 °F (20 °C)
  • Stator Inductance
    25.6 mH 68 °F (20 °C)
  • Stator Resistance
    7.99 Ohm 68 °F (20 °C)
  • Rotor Inertia
    1.67 kg.cm²
  • Torque Constant
    1.41 N.m/A 68 °F (20 °C)
  • Number Of Motor Poles
    10
  • Back Emf Constant
    95.39 V/krpm 68 °F (20 °C)
  • Motor Flange Size
    2.76 in (70 mm)
  • Mounting Support
    International standard flange
  • Holding Brake
    Without
  • Speed Feedback Resolution
    131072 points/turn
  • Feedback Type
    Absolute single turn SinCos Hiperface
  • Key Width
    0.20 in (5 mm)
  • Shaft Length
    1.18 in (30 mm)
  • Shaft Diameter
    0.55 in (14 mm)
  • Shaft End
    Keyed
  • Second Shaft
    Without second shaft end
  • Continuous Stall Current
    2 A
  • Output Current 3S Peak
    6 A 400 V 3 s
  • Continuous Output Current
    2 A 8 kHz
  • Continuous Stall Torque
    30.09 lbf.in (3.4 N.m) 208...480 V three phase
  • EMC Filter
    Integrated
  • Product Or Component Type
    Servo motor with power stage
  • Range Compatibility
    Lexium 32i
  • [Us] Rated Supply Voltage
    208...480 V - 15...10 %
  • Supply Frequency
    50/60 Hz - 5...5 %
  • Device Short Name
    BMI
  • Supply Voltage Limits
    208…480 V
  • Maximum Mechanical Speed
    8000 rpm
  • Network Frequency Limits
    47.5…63 Hz
  • Phase
    Three phase

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents BMI0703P31A Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schneider Electric

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schneider Electric Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo