ATV6000C210A4242NA3 Schneider Electric Electronic Components

Product Details

• Protection Type
  Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overvoltages on the DC bus drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent drive Overload: dr
• Option Card
  Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communic
• Asynchronous Motor Control Profile
  Variable torque standard Sensorless flux vector control Dynamic energy saving Closed loop vector control Constant torque standard
• Provided Equipment
  Medium voltage arrestors Human machine interface Enclosure Cooling fans Plinth Phase-shifting transformer Power cells
• Cable Cross Section
  0.15 in² (95 mm²) line normal duty 0.11 in² (70 mm²) line heavy duty 0.15 in² (95 mm²) motor normal duty 0.11 in² (70 mm²) motor heavy duty
• Electrical Connection
  M10 bar for main supply M10 bar for motor Terminal, clamping capacity: 0.25...2.5 mm² for control Terminal, clamping capacity: 1.5...16 mm² for cooling fan
• Permissible Temporary Current Boost
  1.2 x In during 60 s (normal duty) 1.5 x In during 3 s (normal duty) 1.5 x In during 60 s (heavy duty) 1.8 x In during 3 s (heavy duty)
• Supply
  Internal supply for digital inputs and PoE 24 V DC 21…27 V, <200 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection External supply
• Relay Output Type
  Configurable relay logic R1: fault relay NO/NC Configurable relay logic R2: sequence relay NO Configurable relay logic R3: sequence relay NO
• Overvoltage Category
  II conforming to EN/IEC 61800-5-1 motor side III conforming to EN/IEC 61800-5-1 line side III conforming to EN/IEC 61800-5-1 low voltage connections
• Discrete Input Type
  DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) POEA, POEB PWM output enable, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
• Product Destination
  Permanent magnet motors Asynchronous motors Synchronous motors
• Synchronous Motor Control Profile
  Vector control Synchronous motor with external exitation Permanent magnet motor
• EMC Filter
  Integrated conforming to EN/IEC 61800-3 category C3 control Integrated conforming to EN/IEC 61800-3 category C4 power
• Analogue Input Type
  configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution: 12 bits configurable current: 0...20 mA, impedance: 250 Ohm, resolution: 12 bits
• Maximum Transient Current
  420 A 3 s heavy duty) 420 A 3 s normal duty)
• Line Current
  232 A heavy duty 291 A normal duty
• Motor Power Kw
  1340 kW heavy duty 1680 kW normal duty
• Energy Efficiency Ratio
  0.985 inverter 0.96 total drive including transformer
• Connector Type
  2 RJ45 (on the control block) for Ethernet IP/Modbus TCP 1 RJ45 (on the control block) for Modbus serial
Power Losses
71.5 kW normal duty 57.2 kW heavy duty
Continuous Output Current
224 A heavy duty 280 A normal duty
Analogue Output Type
Configurable voltage 0...10 V DC 470 Ohm 10 bits Configurable current 0...20 mA 500 Ohm 10 bits
Isolation
Electrical between power and control
Relay Output Number
3
Analogue Output Number
2
Discrete Input Number
10
Communication Port Protocol
Ethernet IP/Modbus TCP
Volume Of Cooling Air
5550248.54 Gal/hr(US) (21009.6 m3/h)
Depth
59.06 in (1500.0 mm)
Display Type
10 inch LCD touch screen multi-language
Discrete Output Type
Logic output <= 30 V DC 100 mA
Discrete Output Number
2
Noise Level
83 dB
Net Weight
16007.78 lb(US) (7261.0 kg)
Height
108.31 in (2751.0 mm)
Width
159.84 in (4060.0 mm)
Cable Entry
Bottom
Maximum THDI
<3 % conforming to IEEE 519-1992
Power Factor
96
Apparent Power
2100 kVA
Frequency Resolution
0.01 Hz
Speed Drive Output Frequency
0.5…120 Hz
Output Voltage
<= power supply voltage
Prospective Line Isc
31.5 kA 150 ms
Phase
3 phase
Supply Frequency
50 Hz +/- 5 %
[Us] Rated Supply Voltage
4.16 kV +/- 10 %
Output Type
IGBT inverter cells multilevel PWM
Input Type
24 pulse diode rectifier bridge
IP Degree Of Protection
IP31 conforming to IEC 60529
Assembly Style
In floor-standing enclosure
Product Or Component Type
Medium voltage variable speed drive
Type Of Cooling
Forced convection
Colour Of Enclosure
Light grey (RAL 7035)
Product Specific Application
Process and utilities
Device Short Name
ATV6000
Range Of Product
Altivar Process ATV6000

Related documents ATV6000C210A4242NA3 Specs