ATV6000C125A4242NA3 Schneider Electric Electronic Components

Product Details

• Protection Type
  Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overvoltages on the DC bus drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent drive Overload: dr
• Provided Equipment
  Phase-shifting transformer Cooling fans Enclosure Plinth Medium voltage arrestors Human machine interface Power cells
• Option Card
  Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communic
• Asynchronous Motor Control Profile
  Dynamic energy saving Constant torque standard Closed loop vector control Sensorless flux vector control Variable torque standard
• Cable Cross Section
  0.05 in² (35 mm²) line heavy duty 0.05 in² (35 mm²) motor heavy duty 0.08 in² (50 mm²) line normal duty 0.08 in² (50 mm²) motor normal duty
• Electrical Connection
  M10 bar for main supply M10 bar for motor Terminal, clamping capacity: 0.25...2.5 mm² for control Terminal, clamping capacity: 1.5...16 mm² for cooling fan
• Permissible Temporary Current Boost
  1.2 x In during 60 s (normal duty) 1.5 x In during 3 s (normal duty) 1.5 x In during 60 s (heavy duty) 1.8 x In during 3 s (heavy duty)
• Supply
  Internal supply for digital inputs and PoE 24 V DC 21…27 V, <200 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection External supply
• Discrete Input Type
  DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) POEA, POEB PWM output enable, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
• Overvoltage Category
  II conforming to EN/IEC 61800-5-1 motor side III conforming to EN/IEC 61800-5-1 line side III conforming to EN/IEC 61800-5-1 low voltage connections
• Synchronous Motor Control Profile
  Synchronous motor with external exitation Vector control Permanent magnet motor
• Relay Output Type
  Configurable relay logic R1: fault relay NO/NC Configurable relay logic R2: sequence relay NO Configurable relay logic R3: sequence relay NO
• Product Destination
  Synchronous motors Asynchronous motors Permanent magnet motors
• Energy Efficiency Ratio
  0.985 inverter 0.96 total drive including transformer
• Analogue Input Type
  configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution: 12 bits configurable current: 0...20 mA, impedance: 250 Ohm, resolution: 12 bits
• EMC Filter
  Integrated conforming to EN/IEC 61800-3 category C3 control Integrated conforming to EN/IEC 61800-3 category C4 power
• Power Losses
  42.6 kW normal duty 40.8 kW heavy duty
• Line Current
  174 A normal duty 165 A heavy duty
• Maximum Transient Current
  249 A 3 s normal duty) 298 A 3 s heavy duty)
• Connector Type
  2 RJ45 (on the control block) for Ethernet IP/Modbus TCP 1 RJ45 (on the control block) for Modbus serial
Analogue Output Type
Configurable voltage 0...10 V DC 470 Ohm 10 bits Configurable current 0...20 mA 500 Ohm 10 bits
Continuous Output Current
166 A normal duty 159 A heavy duty
Motor Power Kw
1000 kW normal duty 950 kW heavy duty
Isolation
Electrical between power and control
Relay Output Number
3
Discrete Output Type
Logic output <= 30 V DC 100 mA
Analogue Output Number
2
Discrete Input Number
10
Discrete Output Number
2
Communication Port Protocol
Ethernet IP/Modbus TCP
Display Type
10 inch LCD touch screen multi-language
Volume Of Cooling Air
3519468.77 Gal/hr(US) (13322.4 m3/h)
Noise Level
80 dB
Net Weight
12919.10 lb(US) (5860.0 kg)
Height
108.31 in (2751.0 mm)
Width
148.03 in (3760.0 mm)
Depth
55.12 in (1400.0 mm)
Cable Entry
Bottom
Power Factor
96
Maximum THDI
<3 % conforming to IEEE 519-1992
Apparent Power
1250 kVA
Frequency Resolution
0.01 Hz
Output Voltage
<= power supply voltage
Speed Drive Output Frequency
0.5…120 Hz
Prospective Line Isc
31.5 kA 150 ms
Input Type
24 pulse diode rectifier bridge
[Us] Rated Supply Voltage
4.16 kV +/- 10 %
Supply Frequency
50 Hz +/- 5 %
Output Type
IGBT inverter cells multilevel PWM
Phase
3 phase
Colour Of Enclosure
Light grey (RAL 7035)
Assembly Style
In floor-standing enclosure
IP Degree Of Protection
IP31 conforming to IEC 60529
Type Of Cooling
Forced convection
Product Or Component Type
Medium voltage variable speed drive
Product Specific Application
Process and utilities
Range Of Product
Altivar Process ATV6000
Device Short Name
ATV6000

Related documents ATV6000C125A4242NA3 Specs