ATV212HD37N4 Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control
• Communication Service
  Read holding registers (03) 2 words maximum Monitoring inhibitable Write single register (06) Write multiple registers (16) 2 words maximum Time out setting from 0.1 to 100 s Read device identification (43)
• Asynchronous Motor Control Profile
  Flux vector control without sensor, standard Voltage/frequency ratio, 5 points Voltage/frequency ratio, 2 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic
• Communication Port Protocol
  METASYS N2 BACnet Modbus APOGEE FLN LonWorks
• Sampling Duration
  2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog
• Maximum Switching Current
  5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
• Response Time
  FM 2 ms +/- 0.5 ms analog FLA, FLC 7 ms +/- 0.5 ms discrete FLB, FLC 7 ms +/- 0.5 ms discrete RY, RC 7 ms +/- 0.5 ms discrete
• Analogue Input Type
  VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bit
• Variable Speed Drive Application Selection
  Building - HVAC Compressor for scroll Building - HVAC Fan Building - HVAC Pump
• Type Of Cable
  Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
• Linearity Error
  VIA +/- 0.15 % of maximum value input VIB +/- 0.15 % of maximum value input FM +/- 0.2 % output
• Discrete Output Type
  Configurable relay logic FLA, FLC) NO - 100000 cycles Configurable relay logic FLB, FLC) NC - 100000 cycles Configurable relay logic RY, RC) NO - 100000 cycles
• Discrete Input Type
  F programmable 24 V DC level 1 PLC 4700 Ohm R programmable 24 V DC level 1 PLC 4700 Ohm RES programmable 24 V DC level 1 PLC 4700 Ohm
• Accuracy
  +/- 0.6 % VIA) for a temperature variation 60 °C +/- 0.6 % VIB) for a temperature variation 60 °C +/- 1 % FM) for a temperature variation 60 °C
• Motor Slip Compensation
  Not available in voltage/frequency ratio motor control Automatic whatever the load Adjustable
• Acceleration And Deceleration Ramps
  Linear adjustable separately from 0.01 to 3200 s Automatic based on the load
• Supply
  Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection
• Dielectric Strength
  3535 V DC between earth and power terminals 5092 V DC between control and power terminals
• Switching Frequency
  6...16 kHz adjustable 8...16 kHz with derating factor
• Analogue Output Type
  FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits FM switch-configurable current 0...20 mA 970 Ohm 10 bits
Frequency Resolution
Display unit 0.1 Hz Analog input: 0.024/50 Hz
Motor Power Range AC-3
30…50 kW 380…440 V 3 phase 30…50 kW 480…500 V 3 phase
Discrete Input Logic
Positive logic (source) F, R, RES), <= 5 V, >= 11 V Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Connector Type
1 open style 1 RJ45
Electrical Connection
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14 L1/R, L2/S, L3/T terminal 0.08 in² (50 mm²) / AWG 1/0
Line Current
68.9 A 380 V 54.4 A 480 V
Continuous Output Current
79 A 380 V 79 A 460 V
Tightening Torque
5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 212.42 lbf.in (24 N.m), 212 lb.in L1/R, L2/S, L3/T)
IP Degree Of Protection
IP21
Power Dissipation In W
976 W
Depth
9.61 in (244 mm)
Air Flow
88235.05 Gal/hr(US) (334 m3/h)
Specific Application
HVAC
Number Of Addresses
1…247
Operating Position
Vertical +/- 10 degree
Data Format
8 bits, 1 stop, odd even or no configurable parity
Type Of Polarization
No impedance
Transmission Rate
9600 bps or 19200 bps
Braking To Standstill
By DC injection
Insulation Resistance
>= 1 mOhm 500 V DC for 1 minute
Motor Starter Type
Variable speed drive
Functionality
Mid
Height
21.65 in (550 mm)
Width
9.45 in (240 mm)
Option Card
Communication card LonWorks
Physical Interface
2-wire RS 485
Transmission Frame
RTU
Minimum Switching Current
3 mA 24 V DC configurable relay logic
Discrete Output Number
2
Analogue Output Number
1
Analogue Input Number
2
Isolation
Electrical between power and control
Output Voltage
<= power supply voltage
Local Signalling
for DC bus energized 1 LED (red)
Transient Overtorque
120 % of nominal motor torque +/- 10 % 60 s
Regulation Loop
Adjustable PI regulator
Torque Accuracy
+/- 15 %
Speed Accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn
Speed Range
1…10
Nominal Switching Frequency
8 kHz
Speed Drive Output Frequency
0.5…200 Hz
Maximum Transient Current
86.9 A 60 s
Prospective Line Isc
22 kA
EMC Filter
Class C2 EMC filter integrated
Apparent Power
52 kVA 380 V
Supply Voltage Limits
323…528 V
Supply Frequency
50...60 Hz - 5...5 %
Maximum Horse Power Rating
50 hp
[Us] Rated Supply Voltage
380...480 V - 15...10 %
Assembly Style
With heat sink
Motor Power Kw
37 kW
Phase
3 phase
Product Specific Application
Pumps and fans in HVAC
Device Short Name
ATV212
Product Destination
Asynchronous motors
Product Or Component Type
Variable speed drive
Range Of Product
Altivar 212

Related documents ATV212HD37N4 Specs