ATV212HD30N4 Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control
• Communication Service
  Read device identification (43) Monitoring inhibitable Time out setting from 0.1 to 100 s Read holding registers (03) 2 words maximum Write single register (06) Write multiple registers (16) 2 words maximum
• Sampling Duration
  2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog
• Communication Port Protocol
  APOGEE FLN Modbus BACnet METASYS N2 LonWorks
• Asynchronous Motor Control Profile
  Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Flux vector control without sensor, standard Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 po
• Analogue Input Type
  VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bit
• Maximum Switching Current
  5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
• Response Time
  FM 2 ms +/- 0.5 ms analog FLA, FLC 7 ms +/- 0.5 ms discrete FLB, FLC 7 ms +/- 0.5 ms discrete RY, RC 7 ms +/- 0.5 ms discrete
• Discrete Output Type
  Configurable relay logic FLA, FLC) NO - 100000 cycles Configurable relay logic FLB, FLC) NC - 100000 cycles Configurable relay logic RY, RC) NO - 100000 cycles
• Type Of Cable
  Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
• Discrete Input Type
  F programmable 24 V DC level 1 PLC 4700 Ohm R programmable 24 V DC level 1 PLC 4700 Ohm RES programmable 24 V DC level 1 PLC 4700 Ohm
• Variable Speed Drive Application Selection
  Building - HVAC Compressor for scroll Building - HVAC Fan Building - HVAC Pump
• Accuracy
  +/- 0.6 % VIA) for a temperature variation 60 °C +/- 0.6 % VIB) for a temperature variation 60 °C +/- 1 % FM) for a temperature variation 60 °C
• Motor Slip Compensation
  Not available in voltage/frequency ratio motor control Automatic whatever the load Adjustable
• Linearity Error
  VIA +/- 0.15 % of maximum value input VIB +/- 0.15 % of maximum value input FM +/- 0.2 % output
• Electrical Connection
  VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14 L1/R, L2/S, L3/T terminal 0.08 in² (50 mm²) / AWG 1/0
• Acceleration And Deceleration Ramps
  Linear adjustable separately from 0.01 to 3200 s Automatic based on the load
• Dielectric Strength
  3535 V DC between earth and power terminals 5092 V DC between control and power terminals
• Motor Power Range AC-3
  30…50 kW 380…440 V 3 phase 30…50 kW 480…500 V 3 phase
• Connector Type
  1 open style 1 RJ45
Line Current
44.7 A 480 V 56.7 A 380 V
Switching Frequency
6...16 kHz adjustable 8...16 kHz with derating factor
Discrete Input Logic
Positive logic (source) F, R, RES), <= 5 V, >= 11 V Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Frequency Resolution
Display unit 0.1 Hz Analog input: 0.024/50 Hz
Supply
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection
Continuous Output Current
58.5 A 380 V 58.5 A 460 V
Tightening Torque
5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 212.42 lbf.in (24 N.m), 212 lb.in L1/R, L2/S, L3/T)
Analogue Output Type
FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits FM switch-configurable current 0...20 mA 970 Ohm 10 bits
Motor Starter Type
Variable speed drive
IP Degree Of Protection
IP21
Specific Application
HVAC
Functionality
Mid
Air Flow
76611.27 Gal/hr(US) (290 m3/h)
Power Dissipation In W
847 W
Net Weight
58.20 lb(US) (26.4 kg)
Depth
8.43 in (214 mm)
Height
16.54 in (420 mm)
Option Card
Communication card LonWorks
Width
9.45 in (240 mm)
Type Of Polarization
No impedance
Transmission Frame
RTU
Data Format
8 bits, 1 stop, odd even or no configurable parity
Transmission Rate
9600 bps or 19200 bps
Insulation Resistance
>= 1 mOhm 500 V DC for 1 minute
Braking To Standstill
By DC injection
Analogue Output Number
1
Operating Position
Vertical +/- 10 degree
Number Of Addresses
1…247
Physical Interface
2-wire RS 485
Minimum Switching Current
3 mA 24 V DC configurable relay logic
Discrete Output Number
2
Analogue Input Number
2
Isolation
Electrical between power and control
Output Voltage
<= power supply voltage
Local Signalling
for DC bus energized 1 LED (red)
Regulation Loop
Adjustable PI regulator
Speed Accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn
Transient Overtorque
120 % of nominal motor torque +/- 10 % 60 s
Torque Accuracy
+/- 15 %
Speed Range
1…10
Speed Drive Output Frequency
0.5…200 Hz
Nominal Switching Frequency
8 kHz
Maximum Transient Current
64.4 A 60 s
Prospective Line Isc
22 kA
Apparent Power
44.6 kVA 380 V
EMC Filter
Class C2 EMC filter integrated
Supply Voltage Limits
323…528 V
Supply Frequency
50...60 Hz - 5...5 %
[Us] Rated Supply Voltage
380...480 V - 15...10 %
Maximum Horse Power Rating
40 hp
Motor Power Kw
30 kW
Phase
3 phase
Assembly Style
With heat sink
Product Specific Application
Pumps and fans in HVAC
Product Destination
Asynchronous motors
Device Short Name
ATV212
Product Or Component Type
Variable speed drive
Range Of Product
Altivar 212

Related documents ATV212HD30N4 Specs