RSS 36-SD-ST Schmersal Electronic Components
Part#:RSS 36-SD-ST
Manufacturer:Schmersal
Alt. Part#:101214772
Product Lifecycle:Active
Get a quick Quote!
Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector socket M12, 8-pole; Actuation from side; Max. 31 sensors can be wired in series.; serial diagnostic output; Thermoplastic enclosure; RFID-technology for needs-
About the manufacturer: Schmersal is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.
Check out the RSS 36-SD-ST Schmersal price in the box on the right side or send a quick quote.
Product Details
- Voltage drop Ud, maximum 2 V
- Interfering radiation IEC 61000-6-4
- Voltage, Utilisation category DC13 24 VDC
- Current leakage Ir 0.5 mA
- Versions p-type
- Operating current 150 mA
- Rated impulse withstand voltage Uimp 0.8 kV
- Storage and transport temperature, maximum +85 °C
- Mounting A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
- EMC rating IEC 60947-3
- Voltage, Utilisation category DC12 24 VDC
- Current, Utilisation category DC13 0.25 A
- Current, Utilisation category DC12 0.25 A
- Output current, (fail-safe output), maximum 0.25 A
- Rated operating current (safety outputs) 250 mA
- Switching frequency, approx. 1 Hz
- Required rated short-circuit current to EN 60947-5-1 100 A
- Rated operating voltage, minimum 20.4 VDC
- Rated operating voltage 24 VDC −15 % / +10 %
- Rated operating voltage, maximum 26.4 VDC
- Voltage type DC (direct current)
- No-load supply current I0 100 mA
- Degree of pollution to VDE 0100 3
- Overvoltage category III
- Resistance to vibrations to EN 60068-2-6 10 … 55 Hz, amplitude 1 mm
- Rated insulation voltage Ui 32 VDC
- Protection rating III
- Restistance to shock 30 g / 11 ms
- Material temperature resistance of the cable (at rest), minimum -30 °C
- Material temperature resistance (long-term), maximum +105 °C
- Material temperature resistance of the cable (in motion), minimum -10 °C
- Storage and transport temperature, minimum -25 °C
- Ambient temperature, maximum +70 °C
- Height of sensor 25 mm
- Ambient temperature, minimum -25 °C
- Degree of protection IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
- Switch distance 12 mm
- Width of sensor 106.3 mm
- Length of sensor 22 mm
- Note The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
- Terminal Connector Connector M12, 8-pole
- Ensured switch distance ON Sao 10 mm
- Ensured switch distance OFF Sar 20 mm
- Repeat accuracy R R 0.5 mm
- Hysteresis (Switch distance), maximum 2 mm
- Number of Series-wiring of sensors 31
- Note (Repeat accuracy R) Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
- Actuating panels lateral
- Number of fail-safe digital outputs 2
- Number of semi-conductor outputs with signaling function 1
- Number of LEDs 3
- Integral System Diagnostics, status Yes
- Cascadable Yes
- Short circuit detection Yes
- Diagnostic output Yes
- Safety functions Yes
- Short-circuit recognition Yes
- Duration of risk, maximum 200 ms
- Serial diagnostics Yes
- Standards IEC 60947-5-3
- Installation conditions (mechanical) not flush
- Reaction time, maximum 100 ms
- general information Universal coding
- Housing construction form Block
- Active principle RFID
- Time to readiness, maximum 2,000 ms
- Coding level according to ISO 14119 Low
- Enclosure material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Gross weight 85 g
- Active area lateral
- Sensor topology Sensor for series wiring
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents RSS 36-SD-ST Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Schmersal
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Schmersal Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
