Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

CSS 14-34F0-S-D-M-ST Schmersal Electronic Components

Schmersal CSS 14-34F0-S-D-M-ST Safety sensors; Electronic safety sensors; 1 x connector plug M12, 8-pole; Actuation from side; without edge monitoring of the enabling pushbutton, suitable for automatic start; To control positive-guided relay without downstream safety monitoring module;
Schmersal

Part#:CSS 14-34F0-S-D-M-ST

Manufacturer:Schmersal

Alt. Part#:101188767

Product Lifecycle:Active

Get a quick Quote!

About the product: Safety sensors; Electronic safety sensors; 1 x connector plug M12, 8-pole; Actuation from side; without edge monitoring of the enabling pushbutton, suitable for automatic start; To control positive-guided relay without downstream safety monitoring module;

About the manufacturer: Schmersal is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the CSS 14-34F0-S-D-M-ST Schmersal price in the box on the right side or send a quick quote.

CSS 14-34F0-S-D-M-ST Product Details

  • Degree of protection
    IP65 to EN 60529, IP67 to EN 60529
  • Storage and transport temperature, maximum
    +85 °C
  • Storage and transport temperature, minimum
    -25 °C
  • Ambient temperature, maximum
    +70 °C
  • Restistance to shock
    30 g / 11 ms
  • Ambient temperature, minimum
    -25 °C
  • Ensured switch distance OFF Sar
    13 mm, 17 mm
  • Height of sensor
    108.2 mm
  • Width of sensor
    27 mm
  • Terminal Connector
    Connector plug M12, 8-pole
  • Ensured switch distance ON Sao
    12 mm, 8 mm
  • Switch distance
    10 mm, 14 mm
  • Note
    The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
  • Actuator switch distance
    Actuator CST 180-1 / CST 180-2: 10 mm, Actuator CST 34-S-1: 14 mm, Actuator CST 34-S-2: 14 mm
  • Repeat accuracy R R
    0.5 mm
  • Number of Series-wiring of sensors
    31
  • Hysteresis (Switch distance), maximum
    1.5 mm
  • Actuating panels
    lateral
  • Number of fail-safe digital outputs
    2
  • Integral System Diagnostics, status
    Yes
  • Number of LEDs
    3
  • Cascadable
    Yes
  • Short-circuit recognition
    Yes
  • Safety functions
    Yes
  • Diagnostic output
    Yes
  • Input for enabling pushbutton, suitable for automatic start
    Yes
  • Duration of risk, maximum
    60 ms
  • Active area
    lateral
  • Sensor topology
    Sensor for series wiring
  • Gross weight
    142 g
  • Standards
    IEC 60947-5-3
  • Reaction time, maximum
    30 ms
  • Housing construction form
    Block
  • Enclosure material
    Glass-fibre, reinforced thermoplastic
  • Active principle
    inductive
  • EMC rating
    IEC 61000-6-2
  • Interfering radiation
    IEC 61000-6-4
  • Current, Utilisation category DC13
    0.05 A
  • Voltage, Utilisation category DC13
    24 VDC
  • Rated operating current (safety outputs)
    250 mA
  • Voltage, Utilisation category DC12
    24 VDC
  • Current, Utilisation category DC12
    0.05 A
  • Versions
    p-type
  • Voltage drop Ud, maximum
    5 V
  • Current leakage Ir
    0.5 mA
  • Output current, (fail-safe output), maximum
    0.25 A
  • Switching frequency, approx.
    3 Hz
  • Operating current
    600 mA
  • Voltage type
    DC (direct current)
  • Required rated short-circuit current to EN 60947-5-1
    100 A
  • No-load supply current I0
    100 mA
  • Degree of pollution to VDE 0100
    3
  • Rated insulation voltage Ui
    32 VDC
  • Overvoltage category
    III
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Protection rating
    II
  • Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Length of sensor
    35 mm
  • Note (Repeat accuracy R)
    Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial m
  • Number of semi-conductor outputs with signaling function
    1
  • Short circuit detection
    Yes
  • Installation conditions (mechanical)
    not flush

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents CSS 14-34F0-S-D-M-ST Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

CSS 14-34F0-S-D-M-ST

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo