BDF200-ST1-AS-NH-WS20-LTWH-LTGN Schmersal Electronic Components

BDF200-ST1-AS-NH-WS20-LTWH-LTGN Product Details

• Note
  Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.
• AS-i AS-i Parameter bits (A/B Slave), P0 ... P3
  No function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Input module address
  0
• AS-i Output, DO 0 (A/B Slave)
  Illuminated signal position 4
• AS-i Input, DI 3 (A/B Slave)
  Command device Position 2
• AS-i Output, DO 3 (A/B Slave)
  No Function
• AS-i Output, DO 2 (A/B Slave)
  Illuminated signal position 2
• AS-i Output, DO 1 (A/B Slave)
  Illuminated signal position 3
• AS-i Input, DI 1 (A/B Slave)
  Command device Position 3
• AS-i Output, DO 3 (Safety-Slave)
  No Function
• AS-i Input, DI 0 (A/B Slave)
  Command device Position 4
• AS-i Profile (A/B Slave)
  S-7.A.7.F
• AS-i Input, DI 2 (A/B Slave)
  Command device Position 2
• AS-i Version (A/B Slave)
  V 3.0
• AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3
  No function
• AS-i Output, DO 2 (Safety-Slave)
  No Function
• AS-i Output, DO 1 (Safety-Slave)
  Indicator lamp G24 green
• AS-i Output, DO 0 (Safety-Slave)
  Indicator lamp G24 red
• AS-i Input, Channel 2 (Safety-Slave)
  Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Profile (Safety-Slave)
S-7.B.F.F
AS-i Current consumption, maximum
150 mA
AS-i Version (Safety-Slave)
V 3.0
AS-i Input, Channel 1 (Safety-Slave)
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage, minimum
18 VDC
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Restistance to shock
15 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Protection rating
II
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm / 5 g
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Degree of protection
IP65
Height
69 mm
Ambient temperature, minimum
-25 °C
Ambient temperature, maximum
+65 °C
Storage and transport temperature, minimum
-25 °C
Depth
252.5 mm
Width
40 mm
Mechanical life, Command devices
1,000,000 Operations
Mechanical life, Emergency-Stop button
100,000 Operations
Positions used, position 4
Illuminated pushbutton, green
Reaction time, maximum
100 ms
Indicator lamp
No
Gross weight
280 g
Positions used, position 1
Emergency stop pushbutton
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Standards
IEC 61508, EN 60947-5-1, EN ISO 13850
Positions used, position 3
Illuminated pushbutton, white
Climatic stress
DIN EN 60068

Product condition

Related documents BDF200-ST1-AS-NH-WS20-LTWH-LTGN Specs